{"title":"SDC Quiet Duo LR100 Series Retrofit Electric Latch Retraction Kits","description":"\u003cp\u003eSDC Quiet Duo LR100 Series retrofit motorized electric latch retraction kits add electric latch retraction and dogging to mechanical panic and fire rated exit devices from most major brands, plus matching request-to-exit status kits.\u003c\/p\u003e","products":[{"product_id":"sdc-lr100vdk-quiet-duo-dual-latch-retraction-dogging-kit-for-36-48-inch-von-duprin-98-99-and-33-35-series-exit-devices","title":"SDC LR100VDK Quiet Duo Dual Latch Retraction\/Dogging Kit, for 36-48 Inch Von Duprin 98\/99 and 33\/35 Series Exit Devices","description":"\u003cp\u003eThe SDC LR100VDK Quiet Duo Dual Latch Retraction\/Dogging Kit is for use with 36\"-48\" Inch Von Duprin 98\/99 and 33\/35 Series Exit Devices.\u003c\/p\u003e\n\u003cp\u003eSDC’s QuietDuo™ LR100 series retrofit electric latch retraction kits enable electric access control and dogging of panic and fire-rated mechanical exit devices. When energized the motor retracts the exit device latch and pulls the push pad into the dogged (depressed) position enabling momentary or sustained push-and-pull operation of the door. The latch retraction mechanism may be activated by an access control, remote control device, or building automation system. No door sequencer is required for a pair of manual doors when connected to a suitable power supply. The exit device always provides uninhibited egress.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotorized electric latch retraction and dogging\u003c\/li\u003e\n\u003cli\u003ePanic and fire-rated devices\u003c\/li\u003e\n\u003cli\u003eSimultaneous latch retraction, dogging, and push pad depression*\u003c\/li\u003e\n\u003cli\u003eHigh traffic use\u003c\/li\u003e\n\u003cli\u003eLow current draw\u003c\/li\u003e\n\u003cli\u003eLow energy operator compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e Product Specs\u003c\/h4\u003e\n\u003ctable class=\"table-grid\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100VDK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eCommercial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit of Measure\u003c\/td\u003e\n\u003ctd\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFor Von Duprin 33\/35, 98\/99 Series Exit Devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTechnical Specs\u003c\/h4\u003e\n\u003ctable id=\"prod-technical\" class=\"table-grid\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectric Options\u003c\/td\u003e\n\u003ctd\u003eElectric Latch Retraction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDogging Options\u003c\/td\u003e\n\u003ctd\u003eElectric Dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire Rated\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLatch Retraction Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eCertifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUL 305 Panic Hardware\u003c\/li\u003e\n\u003cli\u003eUL 10C Positive Pressure Fire Tests of Door Assemblies\u003c\/li\u003e\n\u003cli\u003eULC-S104 Standard Method for Fire Tests of Door Assemblies\u003c\/li\u003e\n\u003cli\u003eANSI\/BHMA A156.3 Grade 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":41992428126414,"sku":"LR100VDK","price":597.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/products\/SDC-LR100VDK.jpg?v=1679681128"},{"product_id":"sdc-lrdx1r-request-to-exit-status-kit-for-quiet-duo-lr100-detex-10-40-20-50-80-81-62-63-series-exit-devices","title":"SDC LRDX1R Request to Exit Status Kit for QUIET DUO LR100 Detex 10\/40\/20\/50\/80\/81\/62\/63 Series Exit Devices","description":"\u003ch2\u003eSDC LRDX1R Request to Exit Status Kit for QUIET DUO LR100 Detex 10\/40\/20\/50\/80\/81\/62\/63 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LRDX1R is a request-to-exit (REX) monitoring kit for Detex exit devices, listed by SDC for the Detex 10 \/ 40 rim, 20 \/ 50 SVR and 80 \/ 81 \/ 62 \/ 63 CVR models. It belongs to the retrofit monitoring kits that SDC offers alongside its QuietDuo LR100 series retrofit motorized electric latch retraction kits, and like them it is designed for field installation. A REX monitoring kit can be used to monitor the pushpad\/dogged status on an exit device. For electric latch retraction and dogging on the same Detex rim, SVR and CVR devices, SDC lists the companion LR100DXK kit for 36\" openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequest-to-exit (REX) monitoring kit for Detex exit devices.\u003c\/li\u003e\n\u003cli\u003eMonitors the pushpad\/dogged status on the exit device.\u003c\/li\u003e\n\u003cli\u003eRetrofit kit for field installation.\u003c\/li\u003e\n\u003cli\u003eFits Detex 10 \/ 40 rim, 20 \/ 50 SVR and 80 \/ 81 \/ 62 \/ 63 CVR devices.\u003c\/li\u003e\n\u003cli\u003eRelated product to the SDC QuietDuo LR100 retrofit electric latch retraction kits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a monitoring kit, not a latch retraction kit. SDC describes its purpose as:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRequest-to-exit (REX) monitoring kits can be used to monitor the pushpad\/dogged status on an exit device.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLRDX1R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit request-to-exit (REX) monitoring kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eDetex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 10 \/ 40, SVR: 20 \/ 50, CVR: 80 \/ 81 \/ 62 \/ 63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLR100DXK QuietDuo retrofit electric latch retraction kit (Detex, 36\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840553678,"sku":"LRDX1R","price":97.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/LRDX1R.png?v=1794927054"},{"product_id":"sdc-lrfc1r-request-to-exit-status-kit-for-quiet-duo-lr100-first-choice-3600-3700-series-exit-devices","title":"SDC LRFC1R Request to Exit Status Kit for QUIET DUO LR100 First Choice 3600\/3700 Series Exit Devices","description":"\u003ch2\u003eSDC LRFC1R Request to Exit Status Kit for QUIET DUO LR100 First Choice 3600\/3700 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eDesigned for First Choice 3790 rim and 3690 CVR exit devices, the SDC LRFC1R is a retrofit request-to-exit (REX) monitoring kit. SDC offers it as a related product to its QuietDuo LR100 series retrofit electric latch retraction kits, and it is meant for field installation on the existing device. According to SDC, REX monitoring kits can be used to monitor the pushpad\/dogged status on an exit device. Where electric latch retraction and dogging are also needed on these First Choice devices, SDC lists the LR100FCK kit for 36\" openings and the LR100FCK-EM external module kit for 30\" openings, both covering the same 3790 rim and 3690 CVR models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRetrofit REX monitoring kit for First Choice exit devices.\u003c\/li\u003e\n\u003cli\u003eCompatible with First Choice 3790 rim and 3690 CVR devices.\u003c\/li\u003e\n\u003cli\u003eUsed to monitor the pushpad\/dogged status on the exit device.\u003c\/li\u003e\n\u003cli\u003eDesigned for field installation.\u003c\/li\u003e\n\u003cli\u003ePairs with the SDC LR100FCK and LR100FCK-EM QuietDuo latch retraction kits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe LRFC1R provides monitoring only; it does not retract the latch. SDC states:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRequest-to-exit (REX) monitoring kits can be used to monitor the pushpad\/dogged status on an exit device.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLRFC1R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit request-to-exit (REX) monitoring kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eFirst Choice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 3790, CVR: 3690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLR100FCK QuietDuo retrofit electric latch retraction kit (36\"), LR100FCK-EM external module kit (30\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840586446,"sku":"LRFC1R","price":97.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/LRFC1R.png?v=1794927058"},{"product_id":"sdc-lr100crk-quiet-duo-latch-retraction-dogging-kit-for-36-48-corbin-russwin-ed-series-exit-devices","title":"SDC LR100CRK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" Corbin Russwin ED Series Exit Devices","description":"\u003ch2\u003eSDC LR100CRK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" Corbin Russwin ED Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100CRK is a QuietDuo LR100 series retrofit electric latch retraction kit for Corbin Russwin ED5200 \/ ED4200 rim, ED5400 SVR and ED4800 \/ ED5800 CVR exit devices. Once energized, its motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position, so the door can run in momentary or sustained push and pull operation under an access control, remote control device or building automation system. The LR100 is one unit completely housed within the rail of the device behind the access cover, and it retrofits the device without removing it from the door. Its motorized design gives lower current draw, quieter operation and greater durability than solenoids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMotorized electric latch retraction and dogging for Corbin Russwin ED series exit devices.\u003c\/li\u003e\n\u003cli\u003eSimultaneous latch retraction, dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eWorks with panic and fire rated devices.\u003c\/li\u003e\n\u003cli\u003eOne-piece unit completely housed within the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofits the existing device without removing it from the door.\u003c\/li\u003e\n\u003cli\u003eLow current draw: 1.5 amp inrush and 200 mA continuous at 24 VDC.\u003c\/li\u003e\n\u003cli\u003eSuited to high traffic use and compatible with low energy operators.\u003c\/li\u003e\n\u003cli\u003eQuieter operation and greater durability over time than solenoid designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100CRK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eCorbin Russwin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: ED5200 \/ ED4200, SVR: ED5400, CVR: ED4800 \/ ED5800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRCR1R request-to-exit (REX) monitoring kit, LRCR1L latch status (LS) monitoring kit, SDC 602RF power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840619214,"sku":"LR100CRK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100CRK.png?v=1794344293"},{"product_id":"sdc-lr100dak-quiet-duo-latch-retraction-dogging-kit-for-36-dorma-9300-9400-series-exit-devices","title":"SDC LR100DAK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Dorma 9300\/9400 Series Exit Devices","description":"\u003ch2\u003eSDC LR100DAK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Dorma 9300\/9400 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eDesigned for Dorma 9300 \/ F9300 rim and 9400 \/ F9400 SVR exit devices on 36\" openings, the SDC LR100DAK adds motorized electric latch retraction and dogging to an existing panic or fire rated device. Instead of replacing the hardware, the kit installs inside the rail behind the access cover and is fitted without taking the device off the door. When an access control system, remote control device or building automation system energizes the motor, the latch retracts and the pushpad is pulled into the dogged position. Running at 24 VDC with a 200 mA continuous draw, this QuietDuo LR100 kit is built for high traffic use and is low energy operator compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Dorma 9300 \/ F9300 rim and 9400 \/ F9400 SVR devices on 36\" openings.\u003c\/li\u003e\n\u003cli\u003eRetracts the latch, dogs the device and depresses the pushpad at the same time.\u003c\/li\u003e\n\u003cli\u003eRetrofit installation inside the rail, behind the access cover.\u003c\/li\u003e\n\u003cli\u003eNo need to remove the exit device from the door.\u003c\/li\u003e\n\u003cli\u003eMotor-driven rather than solenoid-driven, for quieter operation and lower current draw.\u003c\/li\u003e\n\u003cli\u003e24 VDC ± 10% input; 1.5 amp inrush, 200 mA continuous.\u003c\/li\u003e\n\u003cli\u003eFor panic and fire rated devices in high traffic openings.\u003c\/li\u003e\n\u003cli\u003eLow energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSDC describes how the motorized mechanism works once it receives power:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100DAK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eDorma\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 9300 \/ F9300, SVR: 9400 \/ F9400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRDA1R request-to-exit (REX) monitoring kit, SDC 602RF power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840651982,"sku":"LR100DAK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100DAK.png?v=1794344293"},{"product_id":"sdc-lr100dmk-quiet-duo-latch-retraction-dogging-kit-for-36-dor-o-matic-1590-and-1490-series-exit-devices","title":"SDC LR100DMK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Dor-O-Matic 1590 and 1490 Series Exit Devices","description":"\u003ch2\u003eSDC LR100DMK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Dor-O-Matic 1590 and 1490 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100DMK brings remote latch retraction to Dor-O-Matic 1590 rim and 1490 CVR exit devices on 36\" openings. Part of SDC's QuietDuo LR100 series, it is a retrofit kit that fits completely within the device rail behind the access cover, so the existing exit device stays on the door. Energizing the motor withdraws the latch and draws the pushpad into the depressed, dogged position for momentary or sustained push and pull operation, while the device always provides uninhibited egress. The kit draws 1.5 amp inrush and 200 mA continuous at 24 VDC, and SDC recommends its 602RF power supply for a single door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Dor-O-Matic 1590 rim and 1490 CVR devices, 36\" opening.\u003c\/li\u003e\n\u003cli\u003eElectric latch retraction and dogging by motor.\u003c\/li\u003e\n\u003cli\u003ePushpad is pulled into the dogged position together with latch retraction.\u003c\/li\u003e\n\u003cli\u003eHoused completely within the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eField installed without taking the device off the door.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated device compatible.\u003c\/li\u003e\n\u003cli\u003eLow current draw and low energy operator compatible.\u003c\/li\u003e\n\u003cli\u003eDesigned for high traffic use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLatch retraction is triggered electrically, and the mechanical exit device keeps its normal egress function. Operation per the SDC cutsheet:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100DMK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eDor-O-Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 1590, CVR: 1490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eSDC 602RF power supply (602RFUR-1 or 634RF for a simultaneous pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840684750,"sku":"LR100DMK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100DMK.png?v=1794344293"},{"product_id":"sdc-lr100frk-quiet-duo-latch-retraction-dogging-kit-for-36-falcon-24-25-series-exit-devices","title":"SDC LR100FRK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Falcon 24\/25 Series Exit Devices","description":"\u003ch2\u003eSDC LR100FRK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Falcon 24\/25 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eFor Falcon 24 and 25 series exit devices on 36\" openings, the SDC LR100FRK retrofit kit provides motorized electric latch retraction and dogging. It fits the rim (25-R \/ F-25-R \/ 24-R \/ F-24-R), SVR (25-V \/ F-25-V \/ 24-V \/ F-24-V) and CVR (25-C \/ F-25-C \/ 24-C \/ F-24-C) versions. The single-piece LR100 unit sits within the rail behind the access cover, and once powered it retracts the latch and pulls the pushpad into the dogged position so the door can be pushed or pulled freely. SDC notes that the motorized design offers lower current draw, quieter operation and greater durability over time compared with solenoids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCovers Falcon 24 \/ 25 rim, SVR and CVR devices on 36\" openings.\u003c\/li\u003e\n\u003cli\u003eMotorized latch retraction with dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eSits entirely within the device rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofit kit: the device stays on the door during installation.\u003c\/li\u003e\n\u003cli\u003eLower current draw than solenoids: 200 mA continuous at 24 VDC.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated device compatible.\u003c\/li\u003e\n\u003cli\u003eHigh traffic use.\u003c\/li\u003e\n\u003cli\u003eCompatible with low energy operators.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHow the LR100 operates on the exit device, in SDC's words:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100FRK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eFalcon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 25-R \/ F-25-R \/ 24-R \/ F-24-R, SVR: 25-V \/ F-25-V \/ 24-V \/ F-24-V, CVR: 25-C \/ F-25-C \/ 24-C \/ F-24-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRFR1R request-to-exit (REX) monitoring kit, SDC 602RF power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840717518,"sku":"LR100FRK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100FRK.png?v=1794344293"},{"product_id":"sdc-lr100sgk-quiet-duo-latch-retraction-dogging-kit-for-36-48-sargent-exit-devices","title":"SDC LR100SGK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" Sargent Exit Devices","description":"\u003ch2\u003eSDC LR100SGK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" Sargent Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100SGK is a QuietDuo LR100 retrofit kit that converts Sargent exit devices to motorized electric latch retraction with dogging, for 36\" to 48\" openings. Compatible models are the Sargent 8500 \/ 8800 rim, 8700 SVR, 8400 \/ 8600 CVR and 8300 \/ 8900 mortise devices. On a signal from access control, a remote control device or a building automation system, the motor retracts the latch and pulls the pushpad into the dogged position. Because the kit is housed entirely within the rail behind the access cover, the device does not have to be removed from the door, which SDC credits with significantly less labor time at installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSargent 8500 \/ 8800 rim, 8700 SVR, 8400 \/ 8600 CVR and 8300 \/ 8900 mortise compatible.\u003c\/li\u003e\n\u003cli\u003eFor 36\" to 48\" openings.\u003c\/li\u003e\n\u003cli\u003eMotorized latch retraction, dogging and pushpad depression in one action.\u003c\/li\u003e\n\u003cli\u003eInstalls within the rail behind the access cover, without removing the device from the door.\u003c\/li\u003e\n\u003cli\u003eWorks on panic and fire rated exit devices.\u003c\/li\u003e\n\u003cli\u003e1.5 amp inrush and 200 mA continuous current draw at 24 VDC.\u003c\/li\u003e\n\u003cli\u003eHigh traffic use; low energy operator compatible.\u003c\/li\u003e\n\u003cli\u003eQuieter and more durable over time than solenoid retraction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100SGK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eSargent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 8500 \/ 8800, SVR: 8700, CVR: 8400 \/ 8600, Mortise: 8300 \/ 8900\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\" - 48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRSG2R and LRSG1R request-to-exit (REX) monitoring kits, SDC 602RF power supply, LR100SGK-EM for 30\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\" - 48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840750286,"sku":"LR100SGK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100SGK.png?v=1794344293"},{"product_id":"sdc-lr100ark-quiet-duo-latch-retraction-kit-for-36-48-adams-rite-exit-devices","title":"SDC LR100ARK Quiet Duo Latch Retraction Kit, for 36\" - 48\" Adams Rite Exit Devices","description":"\u003ch2\u003eSDC LR100ARK Quiet Duo Latch Retraction Kit, for 36\" - 48\" Adams Rite Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100ARK is a QuietDuo LR100 series retrofit electric latch retraction kit for Adams Rite exit devices on 36\" to 48\" openings, covering the 8800 \/ 3700 rim, 8100 \/ 8200 \/ 3100 SVR and 8500 \/ 8600 \/ 3600 CVR models. On this model the motor retracts the latch only; SDC states that the pushpad is not retracted. Activation can come from access control, a remote control device or a building automation system, and the exit device always provides uninhibited egress. The kit fits within the rail behind the access cover without removing the device from the door, and it requires the SDC 631RF power supply for a single door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdams Rite 8800 \/ 3700 rim, 8100 \/ 8200 \/ 3100 SVR and 8500 \/ 8600 \/ 3600 CVR compatible.\u003c\/li\u003e\n\u003cli\u003eFor 36\" to 48\" openings.\u003c\/li\u003e\n\u003cli\u003eMotorized electric latch retraction; retracts the latch only, not the pushpad.\u003c\/li\u003e\n\u003cli\u003eOne unit housed within the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofit without removing the exit device from the door.\u003c\/li\u003e\n\u003cli\u003eRequires SDC 631RF power supply (631RFUR-1 or 634RF for a simultaneous pair).\u003c\/li\u003e\n\u003cli\u003eLow current draw: 200 mA continuous at 24 VDC.\u003c\/li\u003e\n\u003cli\u003eFor panic and fire rated devices and high traffic use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSDC describes how the motorized mechanism works once it receives power:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModels do not retract pushpad, only retract the latch.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100ARK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eAdams Rite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 8800 \/ 3700, SVR: 8100 \/ 8200 \/ 3100, CVR: 8500 \/ 8600 \/ 3600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\" - 48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e631RF for a single door; 631RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRAR1R request-to-exit (REX) monitoring kit, SDC 631RF power supply, LR100ARK-EM for 30\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\" - 48\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840783054,"sku":"LR100ARK","price":571.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100ARK.png?v=1794344293"},{"product_id":"sdc-lr100fak-quiet-duo-latch-retraction-dogging-kit-36-opening-for-dor-o-matic-1790-and-1690-series-exit-devices","title":"SDC LR100FAK Quiet Duo Latch Retraction \/ Dogging Kit, 36\" Opening, for Dor-O-Matic 1790 and 1690 Series Exit Devices","description":"\u003ch2\u003eSDC LR100FAK Quiet Duo Latch Retraction \/ Dogging Kit, 36\" Opening, for Dor-O-Matic 1790 and 1690 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eBuilt for Dor-O-Matic 1790 rim and 1690 CVR exit devices on 36\" openings, the SDC LR100FAK is a QuietDuo LR100 motorized electric latch retraction kit that retrofits the existing device without taking it off the door. When energized, it retracts the latch and pulls the pushpad into the dogged (depressed) position for momentary or sustained push and pull operation. The one-piece LR100 unit is housed completely in the rail behind the access cover. This model is one of the select LR100 kits that require an SDC 631RF power supply, or a 631RFUR-1 or 634RF for a simultaneous pair of doors, and it suits panic and fire rated devices in high traffic openings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDor-O-Matic 1790 rim and 1690 CVR compatible, 36\" opening.\u003c\/li\u003e\n\u003cli\u003eMotorized latch retraction with dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eRequires SDC 631RF power supply; 631RFUR-1 or 634RF for a pair of doors.\u003c\/li\u003e\n\u003cli\u003eSingle unit fully housed in the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofits the device while it stays on the door.\u003c\/li\u003e\n\u003cli\u003e24 VDC ± 10% input with 200 mA continuous draw.\u003c\/li\u003e\n\u003cli\u003eLow energy operator compatible.\u003c\/li\u003e\n\u003cli\u003eRated for use on panic and fire rated devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLatch retraction is triggered electrically, and the mechanical exit device keeps its normal egress function. Operation per the SDC cutsheet:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100FAK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eDor-O-Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 1790, CVR: 1690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e631RF for a single door; 631RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRFA1R request-to-exit (REX) monitoring kit, SDC 631RF power supply, LR100FAK-EM for 33\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840815822,"sku":"LR100FAK","price":571.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100FAK.png?v=1794344293"},{"product_id":"sdc-lr100fck-quiet-duo-latch-retraction-dogging-kit-for-36-first-choice-3600-3700-series-exit-devices","title":"SDC LR100FCK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" First Choice 3600\/3700 Series Exit Devices","description":"\u003ch2\u003eSDC LR100FCK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" First Choice 3600\/3700 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100FCK adds motorized latch retraction and dogging to First Choice 3790 rim and 3690 CVR exit devices on 36\" openings. As a QuietDuo LR100 series retrofit kit, it fits inside the rail of the device behind the access cover, so the exit device does not need to be replaced or removed from the door. Access control, a remote control device or a building automation system can trigger the motor, which retracts the latch and pulls the pushpad into the dogged position for push and pull operation. With 1.5 amp inrush and 200 mA continuous at 24 VDC, the kit is suited to high traffic doors and is compatible with low energy operators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFirst Choice 3790 rim and 3690 CVR compatible on 36\" openings.\u003c\/li\u003e\n\u003cli\u003eMotor retracts the latch and dogs the pushpad in one action.\u003c\/li\u003e\n\u003cli\u003eRetrofit kit that avoids costly replacement of the existing exit device.\u003c\/li\u003e\n\u003cli\u003eCompletely housed in the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eInstalled without removing the device from the door.\u003c\/li\u003e\n\u003cli\u003eFor panic and fire rated devices.\u003c\/li\u003e\n\u003cli\u003eLow current draw; 24 VDC ± 10% input.\u003c\/li\u003e\n\u003cli\u003eHigh traffic use and low energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHow the LR100 operates on the exit device, in SDC's words:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100FCK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eFirst Choice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 3790, CVR: 3690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRFC1R request-to-exit (REX) monitoring kit, SDC 602RF power supply, LR100FCK-EM for 30\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840881358,"sku":"LR100FCK","price":571.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SEC400LR100FCK.png?v=1794344293"},{"product_id":"sdc-lr100vdkem-quiet-duo-latch-retraction-dogging-kit-for-30-von-duprin-98-99-and-33-35-series-exit-devices","title":"SDC LR100VDKEM Quiet Duo Latch Retraction\/Dogging Kit, for 30\" Von Duprin 98\/99 and 33\/35 Series Exit Devices","description":"\u003ch2\u003eSDC LR100VDKEM Quiet Duo Latch Retraction\/Dogging Kit, for 30\" Von Duprin 98\/99 and 33\/35 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100VDK-EM is the external module version of the QuietDuo LR100 kit, sized for Von Duprin 98 \/ 99 and 33A \/ 35A exit devices on 30\" openings. As a two piece space saver unit, it places the controller board outside the rail, gaining up to one inch of spacing within the device so it can accommodate smaller field cut devices. It covers the rim, SVR, CVR and mortise versions listed by SDC. When energized, the motor retracts the latch and pulls the pushpad into the dogged position, enabling momentary or sustained push and pull operation while the device always provides uninhibited egress. Input is 24 VDC ± 10%.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExternal module (EM) design for Von Duprin 98 \/ 99 and 33A \/ 35A devices on 30\" openings.\u003c\/li\u003e\n\u003cli\u003eTwo piece space saver unit with the controller board mounted externally.\u003c\/li\u003e\n\u003cli\u003eGains up to one inch of spacing within the device for smaller field cut devices.\u003c\/li\u003e\n\u003cli\u003eCovers rim, SVR, CVR and mortise device types.\u003c\/li\u003e\n\u003cli\u003eMotorized latch retraction, dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eRetrofits without removing the device from the door.\u003c\/li\u003e\n\u003cli\u003e1.5 amp inrush and 200 mA continuous current draw.\u003c\/li\u003e\n\u003cli\u003eFor panic and fire rated devices; low energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100VDK-EM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100-EM Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit, external module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eVon Duprin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 98 \/ 99 \/ 33A \/ 35A, SVR: 9827 \/ 9927 \/ 3327A \/ 3527A \/ 9857 \/ 9957, CVR: 9847 \/ 9947 \/ 3347A \/ 3547A, 3348A \/ 3548A, Mortise: 9875 \/ 9975\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRVD1R \/ LRVD1L (98 \/ 99) and LRVD3R \/ LRVD3L (33A \/ 35A) monitoring kits, SDC 602RF power supply, LR100VDK for 36\" - 48\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit, External Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eTwo piece space saver unit; controller board mounted externally, gains up to 1\" of spacing within the device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840914126,"sku":"LR100VDKEM","price":605.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100VDKEM.png?v=1794344293"},{"product_id":"sdc-lr100fakem-quiet-duo-latch-retraction-dogging-kit-33-opening-for-dor-o-matic-1790-and-1690-series-exit-devices","title":"SDC LR100FAKEM Quiet Duo Latch Retraction \/ Dogging Kit, 33\" Opening, for Dor-O-Matic 1790 and 1690 Series Exit Devices","description":"\u003ch2\u003eSDC LR100FAKEM Quiet Duo Latch Retraction \/ Dogging Kit, 33\" Opening, for Dor-O-Matic 1790 and 1690 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eFor Dor-O-Matic 1790 rim and 1690 CVR exit devices on 33\" openings, the SDC LR100FAK-EM offers motorized electric latch retraction and dogging in a two piece external module design. Moving the controller board outside the rail gains up to one inch of spacing in the device, which is how the LR100-EM accommodates smaller field cut devices for smaller openings. Once the motor is energized, the latch retracts and the pushpad is drawn into the depressed position, allowing push and pull operation on a signal from access control, a remote control device or a building automation system. The kit retrofits the existing device without removing it from the door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDor-O-Matic 1790 rim and 1690 CVR compatible, 33\" opening.\u003c\/li\u003e\n\u003cli\u003eLR100-EM two piece space saver construction.\u003c\/li\u003e\n\u003cli\u003eController board sits outside the rail, gaining up to one inch of spacing.\u003c\/li\u003e\n\u003cli\u003eIntended for smaller field cut devices or where rail space is limited.\u003c\/li\u003e\n\u003cli\u003eMotor-driven latch retraction, dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eDevice stays on the door during the retrofit.\u003c\/li\u003e\n\u003cli\u003e24 VDC ± 10%; 200 mA continuous.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated device compatible; low energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSDC describes how the motorized mechanism works once it receives power:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100FAK-EM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100-EM Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit, external module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eDor-O-Matic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 1790, CVR: 1690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRFA1R request-to-exit (REX) monitoring kit, LR100FAK for 36\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit, External Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eTwo piece space saver unit; controller board mounted externally, gains up to 1\" of spacing within the device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542840979662,"sku":"LR100FAKEM","price":617.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SEC400LR100FAKEM.png?v=1794344293"},{"product_id":"sdc-lr100fckem-quiet-duo-latch-retraction-dogging-kit-for-30-first-choice-3600-3700-series-exit-devices","title":"SDC LR100FCKEM Quiet Duo Latch Retraction \/ Dogging Kit, for 30\" First Choice 3600\/3700 Series Exit Devices","description":"\u003ch2\u003eSDC LR100FCKEM Quiet Duo Latch Retraction \/ Dogging Kit, for 30\" First Choice 3600\/3700 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100FCK-EM is a QuietDuo LR100-EM external module kit for First Choice 3790 rim and 3690 CVR exit devices on 30\" openings. It uses a two piece space saver layout with the controller board placed externally, freeing up to one inch of spacing inside the device to accommodate smaller field cut devices. When powered by access control, a remote control device or a building automation system, the motor retracts the latch and pulls the pushpad into the dogged position. The kit runs on 24 VDC ± 10% with a 200 mA continuous draw, and SDC recommends the 602RF power supply for a single door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for First Choice 3790 rim and 3690 CVR devices on 30\" openings.\u003c\/li\u003e\n\u003cli\u003eExternal module version: two piece space saver unit.\u003c\/li\u003e\n\u003cli\u003eUp to one inch of extra spacing within the device, with the controller board outside the rail.\u003c\/li\u003e\n\u003cli\u003eRetracts the latch and dogs the pushpad by motor.\u003c\/li\u003e\n\u003cli\u003eFitted as a retrofit with the device left on the door.\u003c\/li\u003e\n\u003cli\u003eLow current draw, lower than solenoid designs.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated devices; high traffic use.\u003c\/li\u003e\n\u003cli\u003eLow energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLatch retraction is triggered electrically, and the mechanical exit device keeps its normal egress function. Operation per the SDC cutsheet:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100FCK-EM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100-EM Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit, external module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eFirst Choice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 3790, CVR: 3690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening\u003c\/td\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRFC1R request-to-exit (REX) monitoring kit, SDC 602RF power supply, LR100FCK for 36\" openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit, External Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eTwo piece space saver unit; controller board mounted externally, gains up to 1\" of spacing within the device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening Width\u003c\/td\u003e\n\u003ctd\u003e30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542841012430,"sku":"LR100FCKEM","price":617.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100FCKEM.png?v=1794344293"},{"product_id":"sdc-lr100jak-quiet-duo-latch-retraction-dogging-kit-for-36-jackson-2000-series-exit-devices","title":"SDC LR100JAK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Jackson 2000 Series Exit Devices","description":"\u003ch2\u003eSDC LR100JAK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" Jackson 2000 Series Exit Devices\u003c\/h2\u003e\u003cp\u003eThe SDC LR100JAK is a QuietDuo LR100 series retrofit kit for Jackson exit devices, listed by SDC for the Jackson 2095 rim and 2085 CVR models. It converts a mechanical panic or fire rated device to motorized electric latch retraction and dogging, with the whole kit housed inside the rail behind the access cover. When energized, the motor pulls the latch back and draws the pushpad into the dogged (depressed) position, so the door can operate in momentary or sustained push and pull mode. The exit device always provides uninhibited egress, and no door sequencer is required for a pair of manual doors with a suitable power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJackson 2095 rim and 2085 CVR compatible.\u003c\/li\u003e\n\u003cli\u003eAdds electric access control and dogging to a mechanical exit device.\u003c\/li\u003e\n\u003cli\u003eSimultaneous latch retraction, dogging and pushpad depression.\u003c\/li\u003e\n\u003cli\u003eWhole kit housed inside the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofit installation without removing the device from the door.\u003c\/li\u003e\n\u003cli\u003eMotorized mechanism with low current draw: 1.5 amp inrush, 200 mA continuous.\u003c\/li\u003e\n\u003cli\u003eFor high traffic use and low energy operators.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated device compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHow the LR100 operates on the exit device, in SDC's words:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100JAK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003eJackson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 2095, CVR: 2085\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eSDC 602RF power supply (602RFUR-1 or 634RF for a simultaneous pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542841045198,"sku":"LR100JAK","price":676.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SEC400LR100JAK.png?v=1794344293"},{"product_id":"sdc-lr100pdk-quiet-duo-latch-retraction-dogging-kit-for-36-48-phi-exit-devices","title":"SDC LR100PDK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" PHI Exit Devices","description":"\u003ch2\u003eSDC LR100PDK Quiet Duo Latch Retraction \/ Dogging Kit, for 36\" - 48\" PHI Exit Devices\u003c\/h2\u003e\u003cp\u003eMade for PHI (Precision) exit devices, the SDC LR100PDK retrofit kit fits the 2100 \/ 2400 \/ 5100 rim, 2200LBR \/ 5200LBR SVR and 2800LBR \/ 2600 CVR models. This QuietDuo LR100 kit uses a motor rather than a solenoid, which SDC credits with lower current draw, quieter operation and greater durability over time. When energized, it retracts the latch and pulls the pushpad into the dogged position for momentary or sustained push and pull operation, triggered by access control, a remote control device or a building automation system. The single unit installs within the rail behind the access cover, without removing the device from the door.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePHI (Precision) 2100 \/ 2400 \/ 5100 rim, 2200LBR \/ 5200LBR SVR and 2800LBR \/ 2600 CVR compatible.\u003c\/li\u003e\n\u003cli\u003eMotorized design: lower current draw, quieter operation and greater durability than solenoids.\u003c\/li\u003e\n\u003cli\u003eLatch retraction, dogging and pushpad depression happen simultaneously.\u003c\/li\u003e\n\u003cli\u003eSingle unit inside the rail behind the access cover.\u003c\/li\u003e\n\u003cli\u003eRetrofit kit; the device is not removed from the door.\u003c\/li\u003e\n\u003cli\u003e24 VDC ± 10% input, 200 mA continuous.\u003c\/li\u003e\n\u003cli\u003ePanic and fire rated devices in high traffic openings.\u003c\/li\u003e\n\u003cli\u003eLow energy operator compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFunctional Details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhen energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.\u003c\/li\u003e\n\u003cli\u003eThe latch retraction mechanism may be activated by an access control, remote control device or building automation system.\u003c\/li\u003e\n\u003cli\u003eNo door sequencer required for a pair of manual doors when connected to a suitable power supply.\u003c\/li\u003e\n\u003cli\u003eThe exit device always provides uninhibited egress.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSDC (Security Door Controls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eLR100PDK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eQuietDuo LR100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRetrofit motorized electric latch retraction kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Device Brand\u003c\/td\u003e\n\u003ctd\u003ePHI (Precision)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Exit Devices\u003c\/td\u003e\n\u003ctd\u003eRim: 2100 \/ 2400 \/ 5100, SVR: 2200LBR \/ 5200LBR, CVR: 2800LBR \/ 2600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eField install; retrofits without removing the device from the door (factory install also offered by SDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended SDC Power Supply\u003c\/td\u003e\n\u003ctd\u003e602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated Products (sold separately)\u003c\/td\u003e\n\u003ctd\u003eLRP1R \/ LRP1L and LRP2R \/ LRP2L monitoring kits, SDC 602RF power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eRetrofit ELR Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eOne unit completely housed within the rail of the device behind the access cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\u003c\/td\u003e\n\u003ctd\u003e24 VDC ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Amp inrush, 200 mA continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLatch Retraction\u003c\/td\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird-Party Power Supply\u003c\/td\u003e\n\u003ctd\u003eLinear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SDC Commercial Door Hardware","offers":[{"title":"Default Title","offer_id":48542841077966,"sku":"LR100PDK","price":560.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/files\/SDCLR100PDK.png?v=1794344293"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0562\/3493\/4478\/collections\/sdc-quiet-duo-lr100-series-retrofit-electric-latch-retraction-kits-collection.jpg?v=1795190141","url":"https:\/\/qualitydoor.com\/collections\/sdc-quiet-duo-lr100-series-retrofit-electric-latch-retraction-kits.oembed","provider":"QualityDoor.com","version":"1.0","type":"link"}