This unit reduces paper waste by 20% - 40% and its black nylon support rod prevents papers for bulging, sagging or falling through the opening. The 90 ° return towel guide prevents paper towels from falling forward when door is opened for servicing and a TowelMate Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening)
Features
- Stainless steel (type304) with 2B finish
- Fits into Bobrick Model number(s) B-3942, B-3944, B-3947, and B-3949 ClassicSeries ® Paper Towel Dispensers and other manufacturers' similar models; and B-4362, B-43944, B-43949 contouraSeries ® manufactured prior to May 2010
- Dispenser fitted with TowelMate Accessory shall dispense 800 multifold paper towels
- Complies with US EPA Reduce & Reuse Resource Conservation Initiative
Specifications
| Materials: | TowelMate Module - 18-8 S, Type 304, 24-gauge (0.6mm) stainless steel with 2B finish
Towel Mate Support Rod - Black, 3/8" (10mm) diameter Nylon 6/6 Rod fastened to Module with two stainless steel sheet metal screws |
| Operation: | Optional Towel Mate Accessory fits into Bobrick Model number(s) B-3942, B-3944, B-3947, or B-3949 Classic Series Paper Towel Dispensers; and B-4362, B-43944, B-43949 contouraSeries manufactured prior to May 2010. Towel Mate Accessory Module has towel guide angle with 90 degree return to prevent paper towels from falling forward out when door is opened for servicing. Towel Mate Accessory Support Rod allows dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging and bunching. To load paper towels in towel tray, place stacks of folded paper towels inside module with bottom paper towel leaf facing forward. Feed first sheet from bottom of the towel tray opening over the rod and through the opening to conceal rod and start dispense |
| Size: | 10-9/16" (270 mm) w x 16" (405 mm) h x 3-5/8" (90 mm) d |
| Installation: | Open door of towel cabinet and remove all existing paper towels from dispenser. Remove existing plastic towel adapter secured inside dispenser cabinet to clear unit of any obstructions. Remove protective film from double back tape on the back of Towel Mate Accessory and place Module inside towel dispenser. Position Towel Mate Support Rod evenly over the towel tray opening with bottom of module resting down on inside of towel tray and firmly press Towel Mate Module into dispenser cabinet back. Load stacks of paper towels into cabinet, start dispense, close cabinet door
For units manufactured prior to July 2006 with stainless steel Towel Guide brackets, insert Towel Mate positioned between brackets |
Certifications
| US EPA: | Complies with Reduce & Reuse Resource Conservation Initiative |
