Bobrick model B-287 folding utility shelf is constructed of satin-finished stainless steel
Features
Satin-finish stainless steel
Easily installed on toilet partition or wall
Pull-down shelf returns to upright position when not in use
Specifications
Materials:
Shelf - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Equipped with heavy-duty internal spring Mounting Bracket - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish
Size:
14-9/16 long, 5-3/16" wide (370 x 150mm)
Capacity:
100 lbs (45.36 kg) when properly installed
Operation:
Shelf automatically returns to upright position when object is removed Toilet compartment door cannot be opened when shelf is in use
Installation:
Mount unit on wall or toilet partition adjacent to latch side of compartment door with two sheet-metal screws, furnished by manufacturer, at points indicated by an S For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts For partitions with particle-board or other solid core, secure unit with sheet-metal screws furnished or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which furnished sheet-metal screws can be secured. If two units are installed back-to-back, provide threaded sleeves and machine screws for the full thickness of partition Note: Provide 5" (125mm) minimum clearance from the inside surface of toilet compartment door to the front edge of shelf to allow door to swing open and close. Provide 14-7/8" (380mm) minimum clearance above the mounting screw holes to the underside of any horizontal projection
