The Norton 6300 Series Low Energy Operator offers a broad set of intelligent functions, such as power close, latch assist, and obstruction detection to safely secure a variety of moderate to high traffic openings. A unique design with one of the slimmest profiles available allows the 6300 to blend more seamlessly with the frame while fitting challenging applications with minimal header space. A modular design, simple controls, and a new wifi interface via a mobile device make for easy installation and setup.

• Adjustable Hold Open: 
  Amount of time a door will stay in the fully open position after an activation
  
• Blow Open for Smoke Ventilation:
  The door opens when the signal is received from the alarm system allowing air or smoke to flow through the opening.
  The door will stay open until the signal from the alarm system is stopped
  
• Emergency Interface Relay (fire panel input)
  The door closes and ignores any activation input until the signal is discontinued
  
• Infinite Hold Open
  The door will hold open at a set position until the power is turned off
  
• Latch Assist
  At the closed position, after activation, the door is pulled in
  After the door has closed, the door is pulled in to assist with latch release/engagement
  
• Obstruction Detection
  Open: door closes if it hits an obstruction while opening
  Close: the door will reverse to the open position if it hits an obstruction while closing Close (Selectable - stop on the stall): the door will stop once it hits an obstruction and will rest against the obstruction until removed
  
• Open Delay
  Delays operator opening for locking hardware
  
• Outside Push Button Disable
  When contact is closed, the outside push button is disabled
  
• Power Assist
  Senses the door is being opened manually and applies a small amount of power to assist a user in opening the door with force less than 5 lbs.
  The door opens only as far as it is moved manually, then closes once released
• Power Close
  Additional force to assist door closing between 7° and 2°
  
• Presence Detector Input
  Input for the external sensor to detect presence at door open or close position only
  
• Push & Go
  As the door is manually opened, the operator "senses" movement and opens door to the full-open position
• Selector Mode Switch
  Off - Disables signal inputs unless Blow Open is activated
  On - Activates signal inputs
  Hold Open - Activates the unit (unless blow closed is activated on 6300) to the hold-open position
  
• Vestibule Delay
  When the push button is pressed, the first door in the vestibule will open. The second door will open once the vestibule door delay has expired. The delay is adjustable.
  

• Power input 120 VAC, 3A, 60Hz
• Current draw 1.5A
• Power output 24VDC @ 1.3A max draw (fewer accessories)

• ANSI/BHMA A156.19 certified
• UL325/991 certified
• UL10C listed for positive pressure fire test
• Complies with requirements for the Americans with Disabilities Act (A.D.A)
• Manufactured in an ISO 9001 and ISO 14001 certified facility