- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Pemko CFM83SLF-HD1-PT-EL-CEPT-US32D Heavy Duty Full Mortise Short Leaf Flush Continuous Geared Hinge, 83" Length, Power Transfer Prep With Securitron EL-CEPT 12-Wire ElectroLynx Power Transfer in US32D Satin Stainless Steel, Clear Anodized
The Pemko CFM83SLF-HD1-PT-EL-CEPT-US32D pairs an 83" heavy duty full mortise short leaf flush continuous geared hinge with a Securitron EL-CEPT concealed electrical power transfer. The clear anodized aluminum hinge is prepped for a power transfer, and the EL-CEPT mortises into the edges of the door and frame to carry power and data from the hinge side of the frame to electrified hardware on the door. Full mortise units are applied to the frame rabbet and door edge to conceal both leaves, and the short leaf flush model is designed for hollow metal doors and frames where the inset conforms to S.D.I. specifications. The EL-CEPT uses ElectroLynx connectors for quick connection. The power transfer cutout is centered at 41-1/2" from the top and bottom of the 83" hinge, so the hinge is reversible for left or right hand doors.
Features:
- Designed for use with doors which range between 1-3/4" to 2-1/4"
- Designed for use with hollow metal doors and frames where the inset conforms to S.D.I. specifications for aligning doors and frames
- Full mortise units are applied to the frame rabbet and door edge to conceal both leaves
- Continuous hinge distributes load stress uniformly along the full length of the door and frame
- Gear design ensures symmetrical operation of each leaf
- Full-height channel cap seals the gap between door and frame, providing security against prying
- Hinge is prepped for a power transfer (PT - Power Transfer Prep)
- Power transfer cutout is centered at 41-1/2" from the top and bottom of the 83" hinge, so the hinge is reversible for left or right hand doors
- Securitron EL-CEPT power transfer mortises into the edges of the door and frame
- EL-CEPT is tamper resistant with no exposed openings
- All metal construction including back boxes
- 7/8" knockouts on back boxes accommodate EMF-type fittings
- EL-CEPT tested to 1,000,000 cycles
- ElectroLynx compatible with 12-22 AWG wires and ElectroLynx connectors
- EL-CEPT is not for use with center hung or balanced doors, pocket or offset pivots, or swing clear hinges
| SKU | CFM83SLF-HD1-PT-EL-CEPT-US32D |
| Manufacturer | Pemko (hinge), Securitron (power transfer) |
| Hinge Model | CFM83SLF-HD1 |
| Hinge Type | Full Mortise Short Leaf Flush Continuous Geared Hinge |
| Duty | Heavy Duty (HD1) |
| Length | 83" |
| Hinge Finish | C - Clear Anodized Aluminum |
| Electrical Modification | PT - Power Transfer Prep |
| Cutout Location | Centered, 41-1/2" C/L |
| Handing | Reversible (Non-Handed) |
| Power Transfer | Securitron EL-CEPT Concealed Electrical Power Transfer |
| Power Transfer Finish | US32D - 630 Satin Stainless Steel |
| Wires | 12 Wires, 12-22 AWG, ElectroLynx Connectors |
| Door Thickness | 1-3/4" to 2-1/4" |
| Hinge BHMA Grade | HD1: Grade 2-150, Grade 1-300, Grade 1-600 (ANSI/BHMA A156.26-2012) |
| Hinge Fire Rating | UL 10C |
| Power Transfer Certifications | ANSI/UL 10C Listed, 3 Hour Rated; ULC-S318 Listed, 3 Hour Rated; ANSI/SDI-BHMA A250.13 (+/- 150 psi) Windstorm Listed; Florida Building Code Approved |
| Power Transfer Cycle Test | 1,000,000 Cycles |
| Power Transfer Shipping Weight | 2.40 lbs (1.09 kg) |







