Skip to content
All SDC Commercial Door Hardware Products

SDC LR100CRK Quiet Duo Latch Retraction / Dogging Kit, for 36" - 48" Corbin Russwin ED Series Exit Devices

  • SKU: LR100CRK

SDC LR100CRK Quiet Duo Latch Retraction / Dogging Kit, for 36" - 48" Corbin Russwin ED Series Exit Devices

  • SKU: LR100CRK
  • ✓
    In Stock
    In Stock
Your Price
$560.04/ea
0% Net 30 Days: Apply Now

SDC LR100CRK Quiet Duo Latch Retraction / Dogging Kit, for 36" - 48" Corbin Russwin ED Series Exit Devices

The SDC LR100CRK is a QuietDuo LR100 series retrofit electric latch retraction kit for Corbin Russwin ED5200 / ED4200 rim, ED5400 SVR and ED4800 / ED5800 CVR exit devices. Once energized, its motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position, so the door can run in momentary or sustained push and pull operation under an access control, remote control device or building automation system. The LR100 is one unit completely housed within the rail of the device behind the access cover, and it retrofits the device without removing it from the door. Its motorized design gives lower current draw, quieter operation and greater durability than solenoids.

Features

  • Motorized electric latch retraction and dogging for Corbin Russwin ED series exit devices.
  • Simultaneous latch retraction, dogging and pushpad depression.
  • Works with panic and fire rated devices.
  • One-piece unit completely housed within the rail behind the access cover.
  • Retrofits the existing device without removing it from the door.
  • Low current draw: 1.5 amp inrush and 200 mA continuous at 24 VDC.
  • Suited to high traffic use and compatible with low energy operators.
  • Quieter operation and greater durability over time than solenoid designs.

Functional Details

The kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:

  • When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.
  • The latch retraction mechanism may be activated by an access control, remote control device or building automation system.
  • No door sequencer required for a pair of manual doors when connected to a suitable power supply.
  • The exit device always provides uninhibited egress.
Manufacturer SDC (Security Door Controls)
SKU LR100CRK
Series QuietDuo LR100 Series
Product Type Retrofit motorized electric latch retraction kit
Exit Device Brand Corbin Russwin
Compatible Exit Devices Rim: ED5200 / ED4200, SVR: ED5400, CVR: ED4800 / ED5800
Installation Field install; retrofits without removing the device from the door (factory install also offered by SDC)
Certifications UL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI/BHMA A156.3 Grade 1
Recommended SDC Power Supply 602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors
Related Products (sold separately) LRCR1R request-to-exit (REX) monitoring kit, LRCR1L latch status (LS) monitoring kit, SDC 602RF power supply
Type Retrofit ELR Kit
Construction One unit completely housed within the rail of the device behind the access cover
Input 24 VDC ± 10%
Current Draw 1.5 Amp inrush, 200 mA continuous
Latch Retraction Motorized
Third-Party Power Supply Linear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended

Related Hardware

Recently viewed