- Description
- Product Specifications
- Technical Specifications
- Document Center
SDC LR100FCKEM Quiet Duo Latch Retraction / Dogging Kit, for 30" First Choice 3600/3700 Series Exit Devices
The SDC LR100FCK-EM is a QuietDuo LR100-EM external module kit for First Choice 3790 rim and 3690 CVR exit devices on 30" openings. It uses a two piece space saver layout with the controller board placed externally, freeing up to one inch of spacing inside the device to accommodate smaller field cut devices. When powered by access control, a remote control device or a building automation system, the motor retracts the latch and pulls the pushpad into the dogged position. The kit runs on 24 VDC ± 10% with a 200 mA continuous draw, and SDC recommends the 602RF power supply for a single door.
Features
- Made for First Choice 3790 rim and 3690 CVR devices on 30" openings.
- External module version: two piece space saver unit.
- Up to one inch of extra spacing within the device, with the controller board outside the rail.
- Retracts the latch and dogs the pushpad by motor.
- Fitted as a retrofit with the device left on the door.
- Low current draw, lower than solenoid designs.
- Panic and fire rated devices; high traffic use.
- Low energy operator compatible.
Functional Details
Latch retraction is triggered electrically, and the mechanical exit device keeps its normal egress function. Operation per the SDC cutsheet:
- When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.
- The latch retraction mechanism may be activated by an access control, remote control device or building automation system.
- No door sequencer required for a pair of manual doors when connected to a suitable power supply.
- The exit device always provides uninhibited egress.
| Manufacturer | SDC (Security Door Controls) |
| SKU | LR100FCK-EM |
| Series | QuietDuo LR100-EM Series |
| Product Type | Retrofit motorized electric latch retraction kit, external module |
| Exit Device Brand | First Choice |
| Compatible Exit Devices | Rim: 3790, CVR: 3690 |
| Opening | 30" |
| Installation | Field install; retrofits without removing the device from the door (factory install also offered by SDC) |
| Certifications | UL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI/BHMA A156.3 Grade 1 |
| Recommended SDC Power Supply | 602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors |
| Related Products (sold separately) | LRFC1R request-to-exit (REX) monitoring kit, SDC 602RF power supply, LR100FCK for 36" openings |
| Type | Retrofit ELR Kit, External Module |
| Construction | Two piece space saver unit; controller board mounted externally, gains up to 1" of spacing within the device |
| Input | 24 VDC ± 10% |
| Current Draw | 1.5 Amp inrush, 200 mA continuous |
| Latch Retraction | Motorized |
| Opening Width | 30" |
| Third-Party Power Supply | Linear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended |

