Skip to content
All SDC Commercial Door Hardware Products

SDC LR100VDKEM Quiet Duo Latch Retraction/Dogging Kit, for 30" Von Duprin 98/99 and 33/35 Series Exit Devices

  • SKU: LR100VDKEM

SDC LR100VDKEM Quiet Duo Latch Retraction/Dogging Kit, for 30" Von Duprin 98/99 and 33/35 Series Exit Devices

  • SKU: LR100VDKEM
  • ✓
    In Stock
    In Stock
Your Price
$605.28/ea
0% Net 30 Days: Apply Now

SDC LR100VDKEM Quiet Duo Latch Retraction/Dogging Kit, for 30" Von Duprin 98/99 and 33/35 Series Exit Devices

The SDC LR100VDK-EM is the external module version of the QuietDuo LR100 kit, sized for Von Duprin 98 / 99 and 33A / 35A exit devices on 30" openings. As a two piece space saver unit, it places the controller board outside the rail, gaining up to one inch of spacing within the device so it can accommodate smaller field cut devices. It covers the rim, SVR, CVR and mortise versions listed by SDC. When energized, the motor retracts the latch and pulls the pushpad into the dogged position, enabling momentary or sustained push and pull operation while the device always provides uninhibited egress. Input is 24 VDC ± 10%.

Features

  • External module (EM) design for Von Duprin 98 / 99 and 33A / 35A devices on 30" openings.
  • Two piece space saver unit with the controller board mounted externally.
  • Gains up to one inch of spacing within the device for smaller field cut devices.
  • Covers rim, SVR, CVR and mortise device types.
  • Motorized latch retraction, dogging and pushpad depression.
  • Retrofits without removing the device from the door.
  • 1.5 amp inrush and 200 mA continuous current draw.
  • For panic and fire rated devices; low energy operator compatible.

Functional Details

The kit is energized from a 24 VDC supply under the control of an access system or other remote device. The cutsheet describes the operation as follows:

  • When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door.
  • The latch retraction mechanism may be activated by an access control, remote control device or building automation system.
  • No door sequencer required for a pair of manual doors when connected to a suitable power supply.
  • The exit device always provides uninhibited egress.
Manufacturer SDC (Security Door Controls)
SKU LR100VDK-EM
Series QuietDuo LR100-EM Series
Product Type Retrofit motorized electric latch retraction kit, external module
Exit Device Brand Von Duprin
Compatible Exit Devices Rim: 98 / 99 / 33A / 35A, SVR: 9827 / 9927 / 3327A / 3527A / 9857 / 9957, CVR: 9847 / 9947 / 3347A / 3547A, 3348A / 3548A, Mortise: 9875 / 9975
Opening 30"
Installation Field install; retrofits without removing the device from the door (factory install also offered by SDC)
Certifications UL 305 Panic Hardware, UL 10C Positive Pressure Fire Tests, ULC-S104 Standard Method for Fire Tests of Door Assemblies, ANSI/BHMA A156.3 Grade 1
Recommended SDC Power Supply 602RF for a single door; 602RFUR-1 or 634RF for a simultaneous pair of doors
Related Products (sold separately) LRVD1R / LRVD1L (98 / 99) and LRVD3R / LRVD3L (33A / 35A) monitoring kits, SDC 602RF power supply, LR100VDK for 36" - 48" openings
Type Retrofit ELR Kit, External Module
Construction Two piece space saver unit; controller board mounted externally, gains up to 1" of spacing within the device
Input 24 VDC ± 10%
Current Draw 1.5 Amp inrush, 200 mA continuous
Latch Retraction Motorized
Opening Width 30"
Third-Party Power Supply Linear, regulated and filtered supply with a minimum rating of 2 amp per LR100 kit recommended

Related Hardware

Recently viewed