All BOBRICK Products
- Description
- Document Center
Description
Stainless steel recessed automatic universal roll paper towel dispenser and waste receptacle with satin finish
Features
- Satin-finish stainless steel
- Seamless beveled flange
- Dispenses universal 1-1/2" to 2" (38 to 51mm) diameter core, up to 8" (205mm) diameter, 8" (205mm) wide, non-perforated, non-proprietary rolls
- Four paper cost savings features: Adjustable towel lengths, second activation time delay, shorter length on the second activation, and stub roll dispensing
- Concealed towels assure hygiene and are intuitively dispensed; no motion is required
- The dispenser is powered by 4 "D" size alkaline batteries (not furnished) or an option 6 volt DC power supply. AC Adapter Kit, Part No. 3974-57
- Receptacle is 8" (205mm) deep
- Complies with EPA Resource Conversation Initiative
Specifications
Materials: |
Cabinet - 18-8 S, type 304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin-finish. Equipped with a tumbler lock keyed like other Bobrick washroom accessories Flange - 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction Door - 18-8 S, type 304, 20-gauge (0.9mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Secured to cabinet with a full-length stainless steel piano hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories Touch-free Roll Towel Dispenser - Durable, high-impact resin materials. Accepts standard-core rolls up to 8" (205mm) wide, 8" (205mm) diameter. 800 ft (244mm) long. Dispenses one 12" (300mm) length of towel per pull. Accommodates up to 3-1/2" (90mm) diameter stub roll with automatic transfer to full roll Waste Receptacle - 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with a satin finish. The front and sides of the bottom and all top edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories. Equipped with interior hooks for optional vinyl liner |
Size: | 17-3/16" (437mm) w x 56" (1422mm) h x 9-1/8" (230mm) d |
Capacity: |
Roll Towel Dispenser: up to 3-1/2" (90mm) diameter stub roll Waste Receptacle: 12-gal. (45.5-L) |
Options: |
Folded Towel Dispenser Module convertible in field: order Bobrick Part No. 3944-52 Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-50 18-gallon Waste Receptacle: order Bobrick Part No. 368-60 Reusable Vinyl Liner: Order Bobrick Part No. 368-16 LinerMate for 12-gal waste only: order Bobrick Part No. 3944-134 |
Operation: | Touch-Free roll towel dispensing mechanism one 12" (300mm) length of paper towel per pull and operates smoothly and quietly. The user only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for a user to advance paper should it become necessary to feed paper through the dispenser. Automatic transfer dispenses stub roll before new roll is dispensed. When stub roll is depleted, the advancement of the paper towel feed wheel allows the main roll to start dispensing without the need to open the dispenser. Dispenser accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non-perforated paper towel rolls and dispenses with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.) To empty waste receptacle, unlock with the key provided Note: To accommodate disposable trash liners, order LinerMate, sold as an optional accessory item. LinerMate eliminates unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste receptacle |
Installation: | Provide framed rough wall opening 15-7/8" wide x 54-5/8" high (403 x 1387mm). The minimum recessed depth required to finish the face of the wall is 4" (100mm). Allow clearance for construction features that may protrude into the opening from the opposite wall. Coordinate with a mechanical engineer to avoid pipes, vents, and conduits. If the unit projects above the top of the wainscot, provide an aluminum channel or other filler to eliminate the gap between the flange and finish face of the wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm ) sheet-metal screws (not furnished) |
Certifications
Barrier-Free Code Compliance: | Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.) |
US EPA: | Complies with Reduce & Reuse Resource Conservation Initiative |
Document Center
Related Hardware
>