Satin-finish stainless steel with stainless steel dispensing mechanism
Flush tumbler lock
Extra roll automatically drops in place when bottom roll is depleted
Theft-resistant, heavy-duty spindles
Extends 2-3/4" (70mm) from wall
Specifications
Materials:
Cabinet - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and return edges complement corners and edges of door Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin finish. Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick contouraSeries washroom accessories. Radius on corners and edges of door match top corners of cabinet and other contouraSeries accessories. Secured to cabinet with two rivets. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories Dispensing Mechanism, Inner Housing and Cam - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel Spindles - Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked
Size:
6-1/16" (155mm) w x 12-1/2" (320mm) h x 5-15/16" (150mm) d
Capacity:
Two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets)
Operation:
Tissue rolls are loaded and locked into dispensing mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking door
Installation:
Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of wall is 3-1/8" (80mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished)
Certifications
Barrier-Free Code Compliance:
Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)