All BOBRICK Products
- Description
- Specifications
- Certifications
- Document Center
Description
Bobrick B43944 Contura Series Recessed Paper Towel Dispenser and Waste Receptacle Unit
The Bobrick B43944 is a stainless steel recessed paper towel dispenser and waste receptacle with TowelMate and LinerMate. Read below to learn its features:
Features
- Satin-finish stainless steel
- Flush tumbler lock
- Dispenses 600 C-fold or 800 multifold towels
- The waste receptacle has 15.0-gal. (56.8-L) capacity
- Extends 5-1/8" (130mm) from wall
- Removable front panel for easy cleaning
- TowelMate consists of a 90 ° return towel guide angle inside the cabinet to prevent paper towels from falling out when the door is opened for servicing
- Nylon rod across the center of the towel tray to dispense paper towels one at a time
- LinerMate can liner holder to facilitate installation and removal of disposable trash liners and retains liner inside waste receptacle
Bobrick B43944 Paper Towel Dispenser and Waste Receptacle Image
Specifications
| Materials: |
Cabinet - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have a satin finish Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with a satin finish. Drawn, one-piece, seamless construction. Radius on corners and return edges complement corners and edges of the door and waste receptacle Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with a satin finish. Drawn, one-piece, seamless construction. The front of the door has the same degree of arc as the front of the waste receptacle and other Bobrick contour series washroom accessories. Radius on corners and edges of door match side edges of the waste receptacle and other contour series accessories. Secured to cabinet with a full-length stainless steel piano hinge. Equipped with a stainless steel cable door-swing limiter and flush tumbler lock keyed like other Bobrick washroom accessories Paper Towel Dispenser - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with a satin finish. Cabinet inside equipped with 90 ° return towel guide angle to prevent paper towels from falling forward out when the door is opened for servicing. The rounded towel tray has hemmed opening to dispense paper towels without tearing. The unit is equipped with TowelMate consisting of a 90 ° return towel guide angle inside the cabinet to prevent paper towels from falling forward out when the door is opened for servicing and a Nylon Rod across the center of the towel tray to dispense paper towels one at a time Towel Mate Towel Rod Assembly - Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is field replaceable. Stainless steel Stop Screws (2) lock Towel Mate Towel Rod assembly in place To retrofit Towel Mate into existing installed units manufactured prior to April 2010 order Towel Mate Accessory Bobrick Part No. 369-130 Waste Receptacle - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin-finish. Formed, one-piece, seamless construction. The removable front panel has the same degree of arc as the front of the door and other Bobrick contour series washroom accessories. Top edge hemmed for safe handling. Radius on side edges of waste receptacle matches corners and edges of paper towel dispenser door and other contour series accessories. Secured to cabinet with two keyholes over studs on the bottom and two tamper-resistant setscrews on top LinerMate Trash Liner Holder - Molded plastic trash liner holder sleeve and a 20-gauge (0.91mm), U-shaped support strap; riveted construction. The liner holder shall have an arc at the front and the same shape as inside of waste receptacle area. LinerMate facilitates installation and removal of disposable trash liners and retains liner inside waste receptacle To retrofit LinerMate into existing installed units manufactured prior to December 2009, order LinerMate Accessory Bobrick Part No. 4369-134 |
| Size: | 17-7/16" (445mm) w x 56-1/4" (1430mm) h x 8-15/16" (225mm) d |
| Capacity: |
Paper Towel Dispenser: 600 C-fold or 800 multifold paper towels Waste Receptacle: 15.0-gal. (56.8-L) |
| Operation: | Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or use of adapters. Cable door-swing limiter prevents damage to washroom accessories and walls. Load paper in towel tray, and then pull one sheet of paper towel over the Towel Mate towel rod and out to conceal rod and start dispense. To insert disposable trash liner, lift LinerMate bag holder up and forward and rest over the edge of waste receptacle front panel with the bottom notches of LinerMate engaged on the top front edge of receptacle. Place disposable trash liner inside LinerMate and fold disposable trash liner over LinerMate sleeve. Tie a knot in the corner of the disposable trash liner, then place LinerMate with disposable trash liner back into the receptacle. To empty, gather disposable trash liner from LinerMate trash liner holder sleeve and lift the bag up |
| Installation: | Provide framed rough wall opening 16" wide x 54-3/4" high (405 x 1390mm). The minimum recessed depth required to finish the face of the wall is 4" (100mm). Allow clearance for construction features that may protrude into rough wall opening from the opposite wall. Coordinate with a mechanical engineer to avoid pipes, vents, and conduits. If the unit projects above the top of the wainscot, provide an aluminum channel or other filler to eliminate the gap between the flange and finish face of the wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) screws (not furnished) |
Certifications
| Barrier-Free Code Compliance: | Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.) |
| US EPA: | Complies with Reduce & Reuse Resource Conservation Initiative |
Document Center
Related Hardware
>
