Bobrick B5191 Shower or Dressing-Area Seat

Brand: BOBRICKSKU: B5191

Price:
Sale price$426.59/ea
In Stock
In Stock

Related Hardware

Ivory-colored water-resistant, stainless steel solid phenolic folding shower seat with black edge


Features

  • Seat is constructed of durable, water-resistant, ivory-colored 5/16" (8mm) thick solid phenolic
  • Frame and mounting brackets are stainless steel with self-locking mechanism
  • Seat is available in 18 Bobrick solid phenolic colors on special order

Specifications

Materials: Seat - One-piece, 5/16" (8mm) thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivory-colored face sheets, and black phenolic-resin core that are integrally bonded - cannot delaminate. Integral slots for water drainage. Secured to frame with stainless steel carriage bolts and acorn nuts
Frame - 18-8 S, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18-gauge (1.2mm), 1" (25mm) diameter seamless tubing
Mounting Flanges - 18-8 S, type-304, 3/16" (5mm) thick stainless steel with satin finish. 3" (75mm) diameter with three mounting screw holes
Baseplate - 18-8 S, type-304, heavy-gauge stainless steel
Spring - 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate
Guide Bracket - 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin finish
Operation: Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position until released by pulling the top of seat away from wall. Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning. Nonporous solid phenolic seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria. Slotless round-head carriage bolts and acorn nuts provide additional
safety to user. Bobrick shower seats, when properly installed, have sufficient strength to support 500 lbs., (227 kg) complying with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)
Installation: Secure unit to wall at points indicated by an S, with the two mounting flanges located at top and the baseplate and guide bracket below. The bottom of the support bracket must be positioned between the baseplate and guide bracket before they are secured to wall or partition. Mounting height of shower seat must comply with local building codes
For stud walls, provide concealed backing to comply with local building codes and secure with #14 x 2-1/2" (6.3 x 65mm) stainless steel sheet-metal screws furnished by manufacturer
For prefabricated shower stalls, provided adequate backing by the shower stall manufacturer. Secure with #14 x 2-1/2" (6.3 x 65mm) stainless steel mounting screws furnished by manufacturer
For masonry walls, provide fiber plugs or expansion shields for use with furnished screws, or provide 1/4" (6mm) toggle bolts or expansion bolts
Caution: These shower seats are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes
Capacity: 500 lbs., (227 kg)
Size: 18" (455 mm) w x 14-7/16" (365 mm) h x 24-3/4" (630 mm) d

Certifications

Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)

Recently viewed

Alternate Products