Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
LCN 9553IQ-REG2-68-628 Electromechanical Swing Door Operator, Double Door Simultaneous, Push Side Surface Mounting, 68" Door Width, Regular Arm, Metal Cover, Machine Screws, Grade 1, Non Handed, Aluminum Anodized Finish
The LCN 9553IQ-REG2-68-628 is a 9550IQ Series electromechanical swing door operator for a simultaneous pair in a 68" opening, measured jamb to jamb. One controller and two motor gearboxes open the two leaves together for accessible entry, while Power Assist and Push n' Go keep manual use easy. The push side surface mount uses two regular arms, machine screws and a metal cover in aluminum 628, clear anodized. Hook-and-cleat mounting lets one installer hang the gearboxes and controller on the backplate. Built for doors up to 600 lbs, the operator is Grade 1 to ANSI A156.19 and listed to UL325, UL228 and UL10C.
Features
- Discreet Off/Hold-Open/Auto switch located outside the cover for easy access.
- On-board 24VDC power supply to power actuators, card readers and safety circuits.
- Accepts up to six optional safety sensors.
- AdaptivIQ technology compensates for wind, carpet drag and HVAC stack pressure so the door latches securely and slamming is minimized.
- Controller with 23 programmable settings, a self-calibration cycle based on the door and opening, and real-time diagnostic information.
- Motor gearbox and controller hook onto the backplate with a hook-and-cleat design for single-person installation.
- REG2 arm set: two regular length, double lever, non-hold open arms for push-side applications.
- Metal cover with rounded corners and sleek edges.
- Meets Grade 1 under ANSI A156.19, with UL325, UL228 and UL10C listings.
- Two motor gearboxes driven by one controller for simultaneous double door operation.
- Operates and controls doors of up to 600 pounds.
- Calibration and adjustments can be made without a ladder through the Allegion Optimize app.
- Power Assist and Push n' Go allow easy manual operation.
- Reverses automatically on closing to minimize potential damage from obstructions.
- Opening speed and opening force are programmed separately.
- Satin aluminum 628 finish (clear anodized).
Functional Details
Both leaves are driven together from one controller. The doors can also be opened by hand for regular pedestrian traffic, with Power Assist and Push n' Go easing the effort.
- Designed for a surface mount on double door applications, this configuration is ideal for simultaneous double door operation and features two motor gearboxes with one controller.
- The 9550IQ can also be operated manually for regular pedestrian traffic and includes both Power Assist and Push n' Go, which can be activated for an easy, smooth manual open.
Included Components
- Motor gearbox mounting brackets (2)
- Controller box mounting hooks (2)
- Machine screws
- Baseplate, manufactured at the specified door width
- Cover end cap kit (one left, one right, cover insert(s), fasteners)
| Manufacturer | LCN (Allegion) |
| SKU | 9553IQ-REG2-68-628 |
| Series | 9550IQ Series Senior Swing electromechanical automatic operator |
| Operator | 9553IQ (two motor gearboxes, one controller) |
| Door Configuration | Double door, simultaneous pair |
| Mounting | Surface mount, push side |
| Arms | REG2 - two regular arms, double push |
| Cover | Metal cover, double door (COV2) |
| Door Opening Width (jamb to jamb) | 68" |
| Finish | US28-628 Satin Aluminum |
| Grade | Grade 1 |
| ANSI Number | ANSI A156.19 |
| UL Listing | UL325, UL228, UL10C |
| Other Compliance | ADA, 100 hour salt spray, CSFM |
| Warranty | 2 years |
| BAA | Meets BAA - Buy American Act |
| Related Products (sold separately) | 9550IQ-3179 Rocker Switch Assembly, 9550IQ-163-1 End Cap Cover Insert, 9550IQ-3077TLS Telescoping Arm, 9550IQ-3077L Long Arm, 9550IQ-3077T Standard Arm |
| Door Weight | Up to 600 lbs |
| Door Width Range | Minimum combined door width 52" - 98" (push); width per leaf 30" - 48" |
| Arm Reveal | Regular arms (push): 0" - 10" |
| Frame Requirements | Top rail 2-3/4" min., head frame 1-3/4" min., face frame 6-1/2" min. |
| Power Input | 115VAC single phase @60Hz or 230VAC single phase @50Hz |
| Power Output | 2A @ 24VDC |
| Programmable Settings | 23 |
| Safety Sensors | Up to six, optional |
| Fasteners | Machine screws (MS) |


