Rixson H117-3/4 LTP Center Hung Pivot for 2" Thick Doors or Greater, Less Top Pivot, Non Handed
This Rixson H117-3/4 Center Hung Pivot is designed for use with 2‟ doors or larger, and the H340 Top Pivot is sold separately for added stability. It is non handed, making it suitable for both left and right handed installations.
Center hung pivots are door hanging means only. To close doors, see floor closer sections.
*For doors taller than 8'6" use top pivot 345 in lieu of 340
Application
- Exterior or Interior Doors
- Weight to 1000 lbs.
- Door Sizes up to 4'0"x 8'6"* (1219 x 2591mm)
- Non-handed
- Standard top pivot H340 sold separately
- Bottom pivot is mortised into floor
- End load arm for minimum 2" (51mm) thick doors
- Pivot point centered in thickness of door
- Additional surface applied thrust bearing
- Door must have radius on pivot edge
- Pivot point remains constant at 2-3/4 from the edge of the door
- Pivot set features sealed bearings for protection against weather and debris
- Not allowed for use on labeled doors and frames
- Furnished with wood and machine screws
- Available with extended spindles in 1/2" (13mm) increments up to 2" (51mm) longer than standard
