Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent LC-8270-12V-WTJ Electrified Fail Safe Mortise Lock, WT Escutcheon, J Lever, 12VDC, Less Cylinder, Grade 1, Field Reversible
The Sargent LC-8270-12V-WTJ is an electrified fail safe mortise lock from the 8200 Series. With 12VDC applied, the outside lever is locked; when power is removed, it unlocks. From the inside, the lever always retracts the latchbolt; from the outside, a key retracts the latchbolt without electronic activation. The lock is supplied less cylinder and comes with a WT escutcheon and a J lever. Its lockbody can be re-handed in the field without opening the case. It is rated Grade 1 under ANSI/BHMA A156.13 and is UL and cUL listed for fire doors rated up to 3 hours.
Features
- 70 electrified fail safe function locks the outside lever when powered and unlocks it when power is removed.
- A key on the outside retracts the latchbolt mechanically, without electronic activation.
- Inside lever always retracts the latchbolt.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- WT heavy wrought escutcheon, surface mounted inside and outside with four exposed screws on each side, paired with a standard J lever.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Easily re-handed in the field without removing parts or opening the lock case.
- UL and cUL listed for use on fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
In fail safe operation, a power failure leaves the outside lever unlocked. While power is applied the outside lever stays locked, a key from the outside still retracts the latchbolt, and the inside lever retracts it at all times.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | LC-8270-12V-WTJ |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Trim | WT Escutcheon, J Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| J Lever | 5-1/4" (133mm) long, 2-13/16" (71mm) from door face |











