Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent LC-8270-24V-ONJ Electrified Fail Safe Mortise Lock, O Rose, NJ Lever, 24VDC, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the LC-8270-24V-ONJ uses the 70 electrified fail safe function. The outside lever is locked only while 24VDC is applied and unlocks as soon as power is removed. The inside lever always retracts the latchbolt, and a key outside retracts the latchbolt for mechanical override. This version ships less cylinder and is trimmed with an O rose and an NJ lever. It is rated Grade 1 under ANSI/BHMA A156.13 and is UL and cUL listed for fire doors rated up to 3 hours.
Features
- 70 electrified fail safe function locks the outside lever when powered and unlocks it when power is removed.
- A key on the outside retracts the latchbolt mechanically, without electronic activation.
- Inside lever always retracts the latchbolt.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- O rose with NJ lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Studio Collection trim is also offered on Sargent 80 Series exit devices and other Sargent locks for a consistent look across a facility.
- Easily re-handed in the field without removing parts or opening the lock case.
- UL and cUL listed for use on fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
The 70 function is fail safe: the outside lever stays locked only while power is applied, so a power loss leaves it free to operate. The inside lever always retracts the latchbolt, and a key outside can retract the latchbolt at any time.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | LC-8270-24V-ONJ |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Trim | O Rose, NJ Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











