Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LC-8270-12V-LNJ Electrified Fail Safe Mortise Lock, LN Rose, J Lever, 12VDC, Request to Exit Switch, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LC-8270-12V-LNJ uses the 70 electrified fail safe function and RX request-to-exit monitoring. With 12VDC applied, the outside lever is locked; when power is removed, it unlocks. From the inside, the lever always retracts the latchbolt; from the outside, a key retracts the latchbolt without electronic activation. The RX option adds two internal switches that report inside and outside lever rotation to an access control system. The lock is supplied less cylinder and comes with an LN rose and a J lever. The EcoFlex design runs from 12-24VDC regulated with a .015 Amp continuous actuator draw.
Features
- 70 electrified fail safe function locks the outside lever when powered and unlocks it when power is removed.
- RX option: two internal switches independently monitor inside and outside lever rotation.
- A key on the outside retracts the latchbolt mechanically, without electronic activation.
- Inside lever always retracts the latchbolt.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- LN rose with standard J lever, through-bolted for proper alignment.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Easily re-handed in the field without removing parts or opening the lock case.
- UL and cUL listed for use on fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
The 70 function is fail safe: the outside lever stays locked only while power is applied, so a power loss leaves it free to operate. The inside lever always retracts the latchbolt, and a key outside can retract the latchbolt at any time.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LC-8270-12V-LNJ |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch |
| Trim | LN Rose, J Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | Two SPDT (type C) switches, inside and outside lever rotation |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| J Lever | 5-1/4" (133mm) long, 2-13/16" (71mm) from door face |











