Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LC-8271-12V-LW1P Electrified Fail Secure Mortise Lock, LW1 Escutcheon, P Lever, 12VDC, Request to Exit Switch, Less Cylinder, Grade 1, Field Reversible
From the Sargent 8200 Series, the RX-LC-8271-12V-LW1P is a 71 function electrified mortise lock built for fail secure operation with request-to-exit monitoring. Power at 12VDC releases the outside lever, and a loss of power keeps it locked. Its RX request-to-exit option monitors inside and outside lever rotation independently with two internal switches. The outside lever can only be locked electronically, and the inside lever always retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an LW1 escutcheon and a P lever. The EcoFlex design runs from 12-24VDC regulated with a .015 Amp continuous actuator draw.
Features
- Fail secure 71 function: power on unlocks the outside lever, power off locks it.
- The inside lever retracts the latchbolt at all times.
- Key outside retracts the latchbolt for mechanical override without electronic activation.
- Request-to-exit (RX) switches track inside and outside lever rotation separately.
- Operates from 12-24VDC regulated with a .015 Amp continuous actuator draw (EcoFlex design).
- Cylinder not included; the lock takes a standard size #41 (1-1/8") mortise cylinder.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Lock case is 12 gauge wrought steel and fully enclosed on all sides.
- Field reversible handing with no parts to remove and no need to open the case.
- LW1 wrought escutcheon with two exposed screws on the inside, paired with a standard P lever.
- Return lever design comes to within 1/2" (13mm) of the door face per the California State Reference Code.
- Lever design meets ADA requirements under national codes.
- Listed by UL and cUL for fire doors rated up to 3 hours.
Functional Details
With the 71 function, power releases the outside lever and a loss of power locks it. The outside lever can only be locked electronically, the inside lever always retracts the latchbolt, and a key outside retracts the latchbolt.
- 71 function — Power ON, unlocks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LC-8271-12V-LW1P |
| Series | 8200 Series Mortise Lock |
| Function | 71 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch |
| Trim | LW1 Escutcheon, P Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | Two SPDT (type C) switches, inside and outside lever rotation |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| P Lever | 5-1/2" (140mm) long, 2-1/2" (64mm) from door face |
| LW1 Escutcheon | 8" (203mm) x 2" (51mm) |











