Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LC-8272-12V-ONJ Electrified Fail Safe Double Cylinder Mortise Lock, O Rose, NJ Lever, 12VDC, Request to Exit Switch, Less Cylinder, Grade 1, Field Reversible
The Sargent RX-LC-8272-12V-ONJ is an electrified fail safe mortise lock from the 8200 Series, built for openings that need remote locking control along with lever monitoring. With 12VDC applied, both levers are locked; when power is removed, both levers unlock. A key on either side retracts the latchbolt, which is why the 72 function is often described as double cylinder. The RX request-to-exit option adds two internal switches that report inside and outside lever rotation to an access control system. This lock is supplied less cylinder with an O rose and NJ lever, and the lockbody can be re-handed in the field without opening the case.
Features
- 72 electrified fail safe function locks both levers when powered and unlocks both levers when power is removed.
- RX request-to-exit option uses two internal switches to monitor inside and outside lever rotation independently.
- EcoFlex electromechanical design operates from 12-24VDC regulated with a .015 Amp continuous actuator draw.
- Key on either side retracts the latchbolt for mechanical override without electronic activation.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Easily re-handed in the field without removing parts or opening the lock case.
- O rose with NJ lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- Studio Collection trim is also offered on Sargent 80 Series exit devices and other Sargent locks for a consistent look across a facility.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Levers meet ADA compliance for national codes.
- UL and cUL listed for use on fire doors rated up to 3 hours.
Functional Details
The 72 function is fail safe: the levers stay locked only while power is applied, so a power loss leaves both sides free to operate. Locking and unlocking are controlled electronically and always apply to both levers together, while a key on either side can retract the latchbolt at any time.
- 72 function — Power ON, locks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LC-8272-12V-ONJ |
| Series | 8200 Series Mortise Lock |
| Function | 72 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch |
| Trim | O Rose, NJ Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | Two SPDT (type C) switches, inside and outside lever rotation |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











