Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LC-8272-24V-LW1B Electrified Fail Safe Double Cylinder Mortise Lock, LW1 Escutcheon, B Lever, 24VDC, Request to Exit Switch, Less Cylinder, Grade 1, Field Reversible
From the Sargent 8200 Series, the RX-LC-8272-24V-LW1B is a 72 function electrified mortise lock built for fail safe operation with request-to-exit monitoring. Applying 24VDC locks both levers together, and removing power releases them. A key on either side retracts the latchbolt for mechanical override without electronic activation. The RX option adds two internal switches that report inside and outside lever rotation to an access control system. Trim is an LW1 escutcheon with a B lever, and the lock ships less cylinder. The EcoFlex design runs from 12-24VDC regulated with a .015 Amp continuous actuator draw.
Features
- 72 electrified fail safe function locks both levers when powered and unlocks both levers when power is removed.
- Key override from either side retracts the latchbolt without electronic activation.
- RX option: two internal switches independently monitor inside and outside lever rotation.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- Lock case is 12 gauge wrought steel and fully enclosed on all sides.
- Field reversible handing with no parts to remove and no need to open the case.
- LW1 wrought escutcheon with two exposed screws on the inside, paired with a standard B lever.
- Levers meet ADA compliance for national codes.
- Listed by UL and cUL for fire doors rated up to 3 hours.
Functional Details
With the 72 function, power holds both levers locked and a loss of power releases them. The levers cannot be locked separately; electronic control always changes both together, and a key on either side retracts the latchbolt.
- 72 function — Power ON, locks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LC-8272-24V-LW1B |
| Series | 8200 Series Mortise Lock |
| Function | 72 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch |
| Trim | LW1 Escutcheon, B Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | Two SPDT (type C) switches, inside and outside lever rotation |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| B Lever | 5" (127mm) long, 2-5/8" (67mm) from door face |
| LW1 Escutcheon | 8" (203mm) x 2" (51mm) |











