Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8270-12V-LNMD Electrified Fail Safe Mortise Lock, LN Rose, MD Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
From the Sargent 8200 Series, the RX-LX-LC-8270-12V-LNMD is a 70 function electrified mortise lock built for fail safe operation with request-to-exit and latchbolt monitoring. Power at 12VDC keeps the outside lever locked, and a loss of power leaves it free to operate. The RX option adds two internal switches that report inside and outside lever rotation, and the LX option adds a single switch that signals latchbolt position. The outside lever can only be locked electronically, and the inside lever always retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an LN rose and an MD lever.
Features
- Outside lever is locked electronically while powered and released on power loss (70 function, fail safe).
- Latchbolt is always retracted by the inside lever.
- Outside key override retracts the latchbolt without electronic activation.
- RX request-to-exit option uses two internal switches to monitor inside and outside lever rotation independently.
- LX option: a single switch mounted within the lockbody signals latchbolt position.
- EcoFlex electromechanical design operates from 12-24VDC regulated with a .015 Amp continuous actuator draw.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- 3/4" throw one-piece stainless steel anti-friction latchbolt, paired with a stainless steel auxiliary deadlatch.
- Closed-on-all-sides case made from heavy duty 12 gauge wrought steel.
- Handing changes in the field without removing parts or opening the lock case.
- LN rose with MD lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- Matching Studio Collection trim is offered on Sargent 80 Series exit devices and other Sargent locks.
- ADA compliant levers for national codes.
- Fire rated: UL and cUL listed for doors rated up to 3 hours.
Functional Details
In fail safe operation, a power failure leaves the outside lever unlocked. While power is applied the outside lever stays locked, a key from the outside still retracts the latchbolt, and the inside lever retracts it at all times.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8270-12V-LNMD |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, MD Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











