Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8270-12V-LNME Electrified Fail Safe Mortise Lock, LN Rose, ME Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Designed for openings that should open from the outside when power is lost, the Sargent RX-LX-LC-8270-12V-LNME is an 8200 Series electrified fail safe mortise lock with request-to-exit and latchbolt monitoring. Applying 12VDC locks the outside lever, and removing power releases it. A key outside retracts the latchbolt at any time, while the inside lever always retracts it. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. Trim is an LN rose with an ME lever, and the lock ships less cylinder. It is rated Grade 1 under ANSI/BHMA A156.13 and is UL and cUL listed for fire doors rated up to 3 hours.
Features
- 70 electrified fail safe function locks the outside lever when powered and unlocks it when power is removed.
- RX option: two internal switches independently monitor inside and outside lever rotation.
- Latchbolt monitor (LX) switch inside the lockbody reports latchbolt position.
- A key on the outside retracts the latchbolt mechanically, without electronic activation.
- Inside lever always retracts the latchbolt.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- LN rose with ME lever from the Sargent Studio Collection Aventura Series, through-bolted for proper alignment.
- Studio Collection trim is also offered on Sargent 80 Series exit devices and other Sargent locks for a consistent look across a facility.
- Easily re-handed in the field without removing parts or opening the lock case.
- UL and cUL listed for use on fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
The 70 function is fail safe: the outside lever stays locked only while power is applied, so a power loss leaves it free to operate. The inside lever always retracts the latchbolt, and a key outside can retract the latchbolt at any time.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8270-12V-LNME |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, ME Lever |
| Lever Collection | Studio Collection, Aventura Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











