Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8270-12V-LNND Electrified Fail Safe Mortise Lock, LN Rose, ND Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
The Sargent RX-LX-LC-8270-12V-LNND combines the 8200 Series mortise lockbody with the 70 fail safe function together with RX request-to-exit and LX latchbolt monitoring. Power at 12VDC keeps the outside lever locked, and a loss of power leaves it free to operate. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. The outside lever can only be locked electronically, and the inside lever always retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an LN rose and an ND lever.
Features
- 70 electrified fail safe function locks the outside lever when powered and unlocks it when power is removed.
- RX option: two internal switches independently monitor inside and outside lever rotation.
- Latchbolt monitor (LX) switch inside the lockbody reports latchbolt position.
- A key on the outside retracts the latchbolt mechanically, without electronic activation.
- Inside lever always retracts the latchbolt.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- LN rose with ND lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Studio Collection trim is also offered on Sargent 80 Series exit devices and other Sargent locks for a consistent look across a facility.
- Easily re-handed in the field without removing parts or opening the lock case.
- UL and cUL listed for use on fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
With the 70 function, power keeps the outside lever locked and a loss of power releases it. The outside lever can only be locked electronically, the inside lever always retracts the latchbolt, and a key outside retracts the latchbolt.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8270-12V-LNND |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, ND Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











