Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8270-12V-LW1J Electrified Fail Safe Mortise Lock, LW1 Escutcheon, J Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LX-LC-8270-12V-LW1J uses the 70 electrified fail safe function together with RX request-to-exit and LX latchbolt monitoring. With 12VDC applied, the outside lever is locked; when power is removed, it unlocks. From the inside, the lever always retracts the latchbolt; from the outside, a key retracts the latchbolt without electronic activation. Inside the lockbody, the RX switches monitor inside and outside lever rotation independently and the LX switch reports latchbolt position. The lock is supplied less cylinder and comes with an LW1 escutcheon and a J lever. It is rated Grade 1 under ANSI/BHMA A156.13 and is UL and cUL listed for fire doors rated up to 3 hours.
Features
- Outside lever is locked electronically while powered and released on power loss (70 function, fail safe).
- Latchbolt is always retracted by the inside lever.
- Outside key override retracts the latchbolt without electronic activation.
- RX request-to-exit option uses two internal switches to monitor inside and outside lever rotation independently.
- LX option: a single switch mounted within the lockbody signals latchbolt position.
- EcoFlex electromechanical design operates from 12-24VDC regulated with a .015 Amp continuous actuator draw.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- 3/4" throw one-piece stainless steel anti-friction latchbolt, paired with a stainless steel auxiliary deadlatch.
- Closed-on-all-sides case made from heavy duty 12 gauge wrought steel.
- Handing changes in the field without removing parts or opening the lock case.
- LW1 wrought escutcheon with two exposed screws on the inside, paired with a standard J lever.
- Complies with the California State Reference Code: the lever returns to within 1/2" (13mm) of the door face.
- ADA compliant levers for national codes.
- Fire rated: UL and cUL listed for doors rated up to 3 hours.
Functional Details
Under the 70 function, the outside lever is controlled electronically: applying power locks it and removing power unlocks it. The inside lever always retracts the latchbolt, and the outside key retracts the latchbolt for mechanical override.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8270-12V-LW1J |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LW1 Escutcheon, J Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| J Lever | 5-1/4" (133mm) long, 2-13/16" (71mm) from door face |
| LW1 Escutcheon | 8" (203mm) x 2" (51mm) |











