Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8270-12V-OJ Electrified Fail Safe Mortise Lock, O Rose, J Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LX-LC-8270-12V-OJ uses the 70 electrified fail safe function together with RX request-to-exit and LX latchbolt monitoring. Power at 12VDC keeps the outside lever locked, and a loss of power leaves it free to operate. Inside the lockbody, the RX switches monitor inside and outside lever rotation independently and the LX switch reports latchbolt position. The outside lever can only be locked electronically, and the inside lever always retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an O rose and a J lever. Its lockbody can be re-handed in the field without opening the case.
Features
- Fail safe 70 function: power on locks the outside lever, power off unlocks it.
- The inside lever retracts the latchbolt at all times.
- Key outside retracts the latchbolt for mechanical override without electronic activation.
- Request-to-exit (RX) switches track inside and outside lever rotation separately.
- LX latchbolt monitor option uses a single switch mounted within the lockbody to signal latchbolt position.
- O rose with standard J lever, through-bolted for proper alignment.
- Return lever design comes to within 1/2" (13mm) of the door face per the California State Reference Code.
- Cylinder not included; the lock takes a standard size #41 (1-1/8") mortise cylinder.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Lock case is 12 gauge wrought steel and fully enclosed on all sides.
- Operates from 12-24VDC regulated with a .015 Amp continuous actuator draw (EcoFlex design).
- Field reversible handing with no parts to remove and no need to open the case.
- Lever design meets ADA requirements under national codes.
- Listed by UL and cUL for fire doors rated up to 3 hours.
Functional Details
The 70 function is fail safe: the outside lever stays locked only while power is applied, so a power loss leaves it free to operate. The inside lever always retracts the latchbolt, and a key outside can retract the latchbolt at any time.
- 70 function — Power ON, locks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8270-12V-OJ |
| Series | 8200 Series Mortise Lock |
| Function | 70 Electrified, Fail Safe |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | O Rose, J Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| J Lever | 5-1/4" (133mm) long, 2-13/16" (71mm) from door face |











