Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8271-24V-OMD Electrified Fail Secure Mortise Lock, O Rose, MD Lever, 24VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LX-LC-8271-24V-OMD uses the 71 electrified fail secure function together with RX request-to-exit and LX latchbolt monitoring. With 24VDC applied, the outside lever unlocks; when power is removed, it is locked. From the inside, the lever always retracts the latchbolt; from the outside, a key retracts the latchbolt without electronic activation. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. The lock is supplied less cylinder and comes with an O rose and an MD lever. The 12 gauge wrought steel case is closed on all sides, and handing can be changed in the field without opening the case.
Features
- Fail secure 71 function: power on unlocks the outside lever, power off locks it.
- The inside lever retracts the latchbolt at all times.
- Key outside retracts the latchbolt for mechanical override without electronic activation.
- Request-to-exit (RX) switches track inside and outside lever rotation separately.
- LX latchbolt monitor option uses a single switch mounted within the lockbody to signal latchbolt position.
- Operates from 12-24VDC regulated with a .015 Amp continuous actuator draw (EcoFlex design).
- Cylinder not included; the lock takes a standard size #41 (1-1/8") mortise cylinder.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Lock case is 12 gauge wrought steel and fully enclosed on all sides.
- Field reversible handing with no parts to remove and no need to open the case.
- O rose with MD lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- The same Studio Collection design is offered on Sargent 80 Series exit devices and other Sargent locks, so trim can match across a facility.
- Lever design meets ADA requirements under national codes.
- Listed by UL and cUL for fire doors rated up to 3 hours.
Functional Details
In fail secure operation, a power failure leaves the outside lever locked. While power is applied the outside lever is free to operate, a key from the outside still retracts the latchbolt, and the inside lever retracts it at all times.
- 71 function — Power ON, unlocks outside lever
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key outside retracts latchbolt
- Lever outside retracts latchbolt, except when locked
- Lever outside can only be locked electronically
- Lever inside always retracts latchbolt
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8271-24V-OMD |
| Series | 8200 Series Mortise Lock |
| Function | 71 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | O Rose, MD Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











