Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8273-12V-LNME Electrified Fail Secure Double Cylinder Mortise Lock, LN Rose, ME Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Designed for openings that should stay locked when power is lost, the Sargent RX-LX-LC-8273-12V-LNME is an 8200 Series electrified fail secure mortise lock with request-to-exit and latchbolt monitoring. Applying 12VDC unlocks both levers together, and removing power locks them again. A key on either side retracts the latchbolt for mechanical override without electronic activation. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. Trim is an LN rose with an ME lever, and the lock ships less cylinder. It is rated Grade 1 under ANSI/BHMA A156.13 and is UL and cUL listed for fire doors rated up to 3 hours.
Features
- Fail secure 73 function: power on unlocks both levers, power off locks them.
- A key on either side retracts the latchbolt mechanically, without electronic activation.
- Request-to-exit (RX) switches track inside and outside lever rotation separately.
- LX option: a single switch mounted within the lockbody signals latchbolt position.
- LN rose with ME lever from the Sargent Studio Collection Aventura Series, through-bolted for proper alignment.
- The same Studio Collection design is offered on Sargent 80 Series exit devices and other Sargent locks, so trim can match across a facility.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Closed-on-all-sides case made from heavy duty 12 gauge wrought steel.
- Operates from 12-24VDC regulated with a .015 Amp continuous actuator draw (EcoFlex design).
- Handing changes in the field without removing parts or opening the lock case.
- Lever design meets ADA requirements under national codes.
- Fire rated: UL and cUL listed for doors rated up to 3 hours.
Functional Details
The 73 function is fail secure: the levers are unlocked only while power is applied, so a power loss leaves both sides locked. Locking and unlocking are controlled electronically and always apply to both levers together, while a key on either side can retract the latchbolt at any time.
- 73 function — Power ON, unlocks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8273-12V-LNME |
| Series | 8200 Series Mortise Lock |
| Function | 73 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, ME Lever |
| Lever Collection | Studio Collection, Aventura Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











