Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8273-12V-OJ Electrified Fail Secure Double Cylinder Mortise Lock, O Rose, J Lever, 12VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LX-LC-8273-12V-OJ uses the 73 electrified fail secure function together with RX request-to-exit and LX latchbolt monitoring. Power at 12VDC releases both levers, and a loss of power keeps both sides locked. Inside the lockbody, the RX switches monitor inside and outside lever rotation independently and the LX switch reports latchbolt position. The levers cannot be locked separately, and a key on either side retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an O rose and a J lever. Its lockbody can be re-handed in the field without opening the case.
Features
- Both levers are unlocked electronically while powered and stay locked on power loss (73 function, fail secure).
- Key on either side retracts the latchbolt for mechanical override without electronic activation.
- RX request-to-exit option uses two internal switches to monitor inside and outside lever rotation independently.
- Latchbolt monitor (LX) switch inside the lockbody reports latchbolt position.
- EcoFlex electromechanical design operates from 12-24VDC regulated with a .015 Amp continuous actuator draw.
- Cylinder not included; the lock takes a standard size #41 (1-1/8") mortise cylinder.
- 3/4" throw one-piece stainless steel anti-friction latchbolt, paired with a stainless steel auxiliary deadlatch.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Easily re-handed in the field without removing parts or opening the lock case.
- O rose with standard J lever, through-bolted for proper alignment.
- Return lever design comes to within 1/2" (13mm) of the door face per the California State Reference Code.
- ADA compliant levers for national codes.
- UL and cUL listed for use on fire doors rated up to 3 hours.
Functional Details
The 73 function is fail secure: the levers are unlocked only while power is applied, so a power loss leaves both sides locked. Locking and unlocking are controlled electronically and always apply to both levers together, while a key on either side can retract the latchbolt at any time.
- 73 function — Power ON, unlocks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8273-12V-OJ |
| Series | 8200 Series Mortise Lock |
| Function | 73 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | O Rose, J Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 12VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| J Lever | 5-1/4" (133mm) long, 2-13/16" (71mm) from door face |











