Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8273-24V-LNL Electrified Fail Secure Double Cylinder Mortise Lock, LN Rose, L Lever, 24VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
The Sargent RX-LX-LC-8273-24V-LNL is an electrified fail secure mortise lock from the 8200 Series with request-to-exit and latchbolt monitoring. Both levers are unlocked only while 24VDC is applied and lock as soon as power is removed. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. A key on either side retracts the latchbolt, which is why the 73 function is often described as double cylinder. This version ships less cylinder and is trimmed with an LN rose and an L lever. The 12 gauge wrought steel case is closed on all sides, and handing can be changed in the field without opening the case.
Features
- 73 electrified fail secure function unlocks both levers when powered and locks both levers when power is removed.
- RX option: two internal switches independently monitor inside and outside lever rotation.
- LX latchbolt monitor option uses a single switch mounted within the lockbody to signal latchbolt position.
- Key override from either side retracts the latchbolt without electronic activation.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- EcoFlex actuator runs on 12-24VDC regulated power and draws .015 Amp continuous.
- Lock case is 12 gauge wrought steel and fully enclosed on all sides.
- Stainless steel auxiliary deadlatch and one-piece stainless steel anti-friction latchbolt with 3/4" throw.
- LN rose with standard L lever, through-bolted for proper alignment.
- Complies with the California State Reference Code: the lever returns to within 1/2" (13mm) of the door face.
- Field reversible handing with no parts to remove and no need to open the case.
- Listed by UL and cUL for fire doors rated up to 3 hours.
- Levers meet ADA compliance for national codes.
Functional Details
The 73 function is fail secure: the levers are unlocked only while power is applied, so a power loss leaves both sides locked. Locking and unlocking are controlled electronically and always apply to both levers together, while a key on either side can retract the latchbolt at any time.
- 73 function — Power ON, unlocks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8273-24V-LNL |
| Series | 8200 Series Mortise Lock |
| Function | 73 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, L Lever |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |
| L Lever | 5" (127mm) long, 2-3/8" (60mm) from door face |











