Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8273-24V-LNMD Electrified Fail Secure Double Cylinder Mortise Lock, LN Rose, MD Lever, 24VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
Built on the Sargent 8200 Series lockbody, the RX-LX-LC-8273-24V-LNMD uses the 73 electrified fail secure function together with RX request-to-exit and LX latchbolt monitoring. Power at 24VDC releases both levers, and a loss of power keeps both sides locked. Two switches inside the lockbody track inside and outside lever rotation, while a separate switch signals the latchbolt position. The levers cannot be locked separately, and a key on either side retracts the latchbolt. It is supplied less cylinder, so the cylinder is ordered separately, and it is fitted with an LN rose and an MD lever. Handing can be changed in the field without removing parts or opening the lock case.
Features
- Fail secure 73 function: power on unlocks both levers, power off locks them.
- A key on either side retracts the latchbolt mechanically, without electronic activation.
- Request-to-exit (RX) switches track inside and outside lever rotation separately.
- LX option: a single switch mounted within the lockbody signals latchbolt position.
- LN rose with MD lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- The same Studio Collection design is offered on Sargent 80 Series exit devices and other Sargent locks, so trim can match across a facility.
- Less cylinder: order a size #41 (1-1/8") mortise cylinder separately.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Closed-on-all-sides case made from heavy duty 12 gauge wrought steel.
- Operates from 12-24VDC regulated with a .015 Amp continuous actuator draw (EcoFlex design).
- Handing changes in the field without removing parts or opening the lock case.
- Lever design meets ADA requirements under national codes.
- Fire rated: UL and cUL listed for doors rated up to 3 hours.
Functional Details
Under the 73 function, both levers are controlled electronically: applying power unlocks them and removing power locks them. The levers cannot be locked separately, and a key on either side retracts the latchbolt for mechanical override.
- 73 function — Power ON, unlocks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8273-24V-LNMD |
| Series | 8200 Series Mortise Lock |
| Function | 73 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, MD Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











