Buy Complete Door Hardware Set
- Description
- Product Specifications
- Technical Specifications
- Document Center
- Handing Chart
Sargent RX-LX-LC-8273-24V-LNNJ Electrified Fail Secure Double Cylinder Mortise Lock, LN Rose, NJ Lever, 24VDC, Request to Exit Switch, Latchbolt Monitor, Less Cylinder, Grade 1, Field Reversible
The Sargent RX-LX-LC-8273-24V-LNNJ is an electrified fail secure mortise lock from the 8200 Series with both request-to-exit and latchbolt monitoring. With 24VDC applied, both levers unlock; when power is removed, both levers are locked. A key on either side retracts the latchbolt, which is why the 73 function is often described as double cylinder. The RX option adds two internal switches that report inside and outside lever rotation, and the LX option adds a single switch that signals latchbolt position. The lock is supplied less cylinder with an LN rose and an NJ lever, and the lockbody can be re-handed in the field without opening the case.
Features
- 73 electrified fail secure function unlocks both levers when powered and locks both levers when power is removed.
- RX request-to-exit option uses two internal switches to monitor inside and outside lever rotation independently.
- LX latchbolt monitor option uses a single switch mounted within the lockbody to signal latchbolt position.
- EcoFlex electromechanical design operates from 12-24VDC regulated with a .015 Amp continuous actuator draw.
- Key on either side retracts the latchbolt for mechanical override without electronic activation.
- Supplied less cylinder; the 8200 Series uses a size #41 (1-1/8") mortise cylinder, ordered separately.
- One-piece stainless steel anti-friction latchbolt with 3/4" throw and a stainless steel auxiliary deadlatch.
- Heavy duty 12 gauge wrought steel case, closed on all sides.
- Easily re-handed in the field without removing parts or opening the lock case.
- LN rose with NJ lever from the Sargent Studio Collection Centro Series, through-bolted for proper alignment.
- Studio Collection trim is also offered on Sargent 80 Series exit devices and other Sargent locks for a consistent look across a facility.
- Lever returns to within 1/2" (13mm) of the door face, complying with the California State Reference Code.
- Levers meet ADA compliance for national codes.
- UL and cUL listed for use on fire doors rated up to 3 hours.
Functional Details
The 73 function is fail secure: the levers are unlocked only while power is applied, so a power loss leaves both sides locked. Locking and unlocking are controlled electronically and always apply to both levers together, while a key on either side can retract the latchbolt at any time.
- 73 function — Power ON, unlocks both levers
- Specify voltage: 12VDC or 24VDC (operates from 12-24VDC)
- Key on either side retracts latchbolt
- Lever from either side retracts latchbolt, except when levers are locked
- Both Levers can only be locked & unlocked electronically
- Levers can not be locked separately, only together
- Auxiliary deadlatch
| Manufacturer | Sargent (ASSA ABLOY) |
| SKU | RX-LX-LC-8273-24V-LNNJ |
| Series | 8200 Series Mortise Lock |
| Function | 73 Electrified, Fail Secure |
| Monitoring | RX Request-to-Exit Switch, LX Latchbolt Monitor |
| Trim | LN Rose, NJ Lever |
| Lever Collection | Studio Collection, Centro Series |
| Cylinder | Less Cylinder |
| Grade | Grade 1 |
| ANSI Number | ANSI/BHMA A156.13, Series 1000 |
| UL Listing Type | UL and cUL listed, fire doors up to 3 hours (A label) |
| Accessibility | Meets ANSI A117.1 |
| Handing | Field reversible |
| Limited Warranty | 2 years (electrified locks) |
| Voltage | 24VDC (operates from 12-24VDC regulated) |
| Actuator Current Draw | .015 Amp continuous |
| Power Supply Sizing | Maximum 2 locks per 1 Amp power supply (1/2 Amp peak current draw) |
| Operating Temperature | -31°F to 151°F (-35°C to 66°C) |
| Monitoring Switches | SPDT (type C); two RX switches for inside and outside lever rotation, one LX switch for latchbolt position |
| Cable Run | Over 500 ft with minimum 22 AWG wire |
| Backset | 2-3/4" (70mm) |
| Door Thickness | 1-3/4" (44mm) standard |
| Minimum Stile | 4-3/4" (121mm) for electrical function locks |
| Armored Front | 8" x 1-1/4" (203mm x 31mm), adjustable flat to 1/8" in 2" bevel |
| Latchbolt | 3/4" (19mm) throw, one-piece stainless steel |
| Lock Case | 12 gauge wrought steel, 7/64" (.109") thick |











